Használati útmutató Emphasys IC6.0

Emphasys hangszóró IC6.0

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Emphasys IC6.0 (4 oldal) a hangszóró kategóriában. Ezt az útmutatót 4 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/4
EMPHASYS
In-Ceiling Speakers
from EMPHASYS are designed to deliver
crisp, full-range sound for today’s home the-
ater and distributed audio environments,
where digital media places extreme demands
on a speaker’s capability. Accordingly, these
models are formulated for distortion-free
sound with the power handling needed for
movies, concerts, sports events and TV shows.
The IC8.5 and IC6.7, for example, combine
an aluminum cone woofer with a pivoting
aluminum dome tweeter for extended re-
sponse and high power handling. Moreover,
the IC6.7 and IC8.5 feature separate switch-
es for bass and treble adjustment, making it
possible to tailor the speaker’s response to
room acoustics. The IC6.5 and IC6.0 offer
the smooth sound of a polypropylene woofer
and soft dome tweeter. For any configura-
tion, large or small, there’s an EMPHASYS
In-Ceiling model that works beautifully.
Positioning the Speakers
EMPHASYS In-Ceiling Speakers, with
their superior clarity and power
handling, provide exceptional
versatility for the home the-
ater environment. A single
speaker can be used for
the front center channel,
or a pair can be used for
left and right in the front
or rear of the system.
The In-Ceiling Speaker as a Center Channel
In-Ceiling Speakers are designed to blend seamlessly with other EMPHASYS speakers
and accessories, and to fill the specific needs of any installation. However, if the speaker
is to be used for the center channel, it should be placed directly above the TV.
Additionally, the performance of the overall system will be enhanced if the center
channel speaker is aligned as closely as possible to the horizontal plane of the front left
and right speakers.
Installer's Guide
IC8.5 IC6.7 IC6.5 IC6.0
2
3. Mark the hole. A template for setting the hole is provided in
the box. Position the template in the desired position and outline
it on the ceiling using a pencil.
4. Cut the hole. CAUTION: This is the most important part of the
installation. If you aren’t certain whether there are any obstruc-
tions in the desired mounting area, use a drywall saw to cut a
small hole at the center of the spot you’ve outlined. Cut at a 45°
angle toward the inside of the hole (see Diagram 2).
You can use the cutout piece to fill the hole again if obstructions
are found. Once the mounting location is deemed to be free of
obstructions, cut the outline at a 90° angle relative to the surface
of the ceiling.
5. If the area in the ceiling isn’t already insulated, add insulation
material sufficient to fill the cavity. If the insulation material used is
faced with foil or paper, position the foil or paper away from the
speaker.
CAUTION: Speaker components can get hot while playing music at
moderate to high volume levels. There should be nothing at all touch-
ing the speaker. Material in proximity to the back of the speaker must
have at a minimum 1” or 26mm clearance for non-flammable materials
and more for flammable materials like plastic vapor barriers.
Preparing the Surface for Mounting
Precautions for Installation
Careful consideration should be given to the possible presence of
electrical conduits, piping, HVAC duct work and other elements in
the ceiling before the Speakers are installed. If there is In-Ceiling
any doubt regarding the most acceptable locations for the speak-
ers, please consult EMPHASYS Technical Support or the dealer.
New Construction: Unfinished Ceiling
A new construction bracket, available from your dealer, can be
installed prior to drywall application across joists (up to 24" on-
center) where a speaker will be located. After the hole is cut and
the drywall is installed, the speakers can be easily installed follow-
ing the instructions for mounting in “Finished Ceiling” below.
Note: If the speakers are to be mounted more than 24" on-center, a
special “extra-long wing” is available from your dealer.
Finished Ceiling
Prior to the actual installation of the speakers, it will be necessary
to run speaker wire to the locations in which they’ll be mounted.
See your dealer for more information. Then, with the wire in
place, the speakers can be mounted. To ensure a professional-
looking result, follow the simple steps described below:
1. Choose the general location for the installation of each speak-
er, being certain that these areas present no obstructions such as
electrical conduit, HVAC duct work or water lines.
2. Find the joists nearest the desired location for the speaker.
EMPHASYS recommends the use of a good stud finder for this
procedure. If you are lining up the speakers to some other object
or molding in the room, be sure to allow for the size of the baffle,
which extends beyond the mounting hole on all four sides of the
In-Ceiling Speaker.
Speaker Adjustments
Creating a Zone for Optimized Listening
The In-Ceiling Speakers should be placed so that they project, as
much as possible, toward the listening position. This will ensure
an accurate stereo image and help minimize the creation of
excessive sound reflections.
If the speakers are to be mounted in a very high ceiling, the
pivoting tweeters (not in IC6.0) should be aimed directly toward
the listening position. (See Diagram 1)
In other cases it might be preferable to aim the tweeters slightly
outward, away from the listening position.
CAUTION: The tweeter dome, whether aluminum or silk, can be
damaged through direct contact with fingers or objects. Please be
careful when installing and adjusting the speaker.
Diagram 1:
Tweeter
Push Tweeter Here
Diagram 2:
Ceiling Cutout
Painting the Grilles
We recommend painting your grilles prior to installation. If you
decide to paint them in the future, it is best to remove them by
simply detaching them from the speaker. Do not paint the grilles
while they are installed on the speaker.
Before painting, be sure to remove the cloth material from
beneath the grille. Once painted, place the cloth back to its
position beneath the grille.
When painting, be careful not to clog the holes of the grille. The
sound of the speaker will be dramatically reduced if the perfora-
tions in the grille are covered in paint.
EMPHASYS recommends only light spray painting using five parts
thinning agent to one part paint.
CAUTION: Excessive tightening may torque the baffle, crack the
ceiling or cause difficulty in aligning the grille.
4. Reattach the grille onto the speaker baffle.
Installing the Speakers
The In-Ceiling Speakers feature a mounting system with four
swiveling feet for quick, secure installation. Use the following
steps:
1. Remove the grille from the speaker baffle.
2. Attach the speaker wire (observing the proper polarity with
your amplifier, matching positive (red) to positive and negative
(black) to negative). Be certain the left channel of the amplifier is
connected to the left speaker, and that the right channel is con-
nected to the right speaker.
3. Be sure the mounting feet are turned inward to clear the
opening, and then insert the speaker into the ceiling. Position the
speaker into the hole. Note: The speaker is designed to conform to
minor imperfections in the ceiling’s surface. Tighten the four screws
on the front of the baffle only so much that the speaker becomes
snug against the ceiling. As you tighten the screws, the feet will
flip into an outward position clamping the drywall (see Diagram 3),
between the feet and the speaker.
Treble Adjustment
The Treble switch allows +3dB of adjustment from the “0” position,
where the most linear frequency response is maintained. If more
treble is desired, simply move the switch to the “+3” position. To
return to the neutral setting, move the switch back to the “0”
position. The Treble switch can be adjusted whenever desired.
(See Diagram 4)
Bass Adjustment
The Bass switch provides +3dB of bass adjustment from the “0”
position, where the flattest bass frequency response is maintained.
For extra bass, push the switch to the “+3” position. To return to
the neutral setting, move the switch back to the “0” position. As
with treble adjustment, the Bass switch can be moved whenever
desired. (See Diagram 4)
Adjusting the Frequency Response on IC6.7 & IC8.5
Diagram 4:
Adjustment Switches
Bass
Treble
0
+3
0
+3
Bass Adjustment Switch
Treble Adjustment Switch
3
Diagram 3:
Mounting Feet
Speaker

Termékspecifikációk

Márka: Emphasys
Kategória: hangszóró
Modell: IC6.0

Szüksége van segítségre?

Ha segítségre van szüksége Emphasys IC6.0, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók hangszóró Emphasys

Emphasys

Emphasys DC6.0 Útmutató

16 Szeptember 2024
Emphasys

Emphasys IW6.0 Útmutató

17 Július 2024
Emphasys

Emphasys IC6.0 Útmutató

17 Július 2024

Útmutatók hangszóró

Legújabb útmutatók hangszóró

Behringer

Behringer B2520 PRO Útmutató

10 Április 2025
Marshall

Marshall Willen Útmutató

10 Április 2025
JBL

JBL Control 426LP Útmutató

9 Április 2025
Crestron

Crestron SAROS IC8T Útmutató

8 Április 2025
LD Systems

LD Systems STINGER G3 TMB Útmutató

8 Április 2025
JBL

JBL Conceal C83 Útmutató

8 Április 2025
Crestron

Crestron SAROS ICE4T Útmutató

7 Április 2025
Crestron

Crestron SAROS ICI6T Útmutató

7 Április 2025
Focal

Focal K2 Power M FRAK Útmutató

5 Április 2025
Match

Match UP C42BMW-FRT.3 Útmutató

3 Április 2025