Használati útmutató Emphasys IW6.0

Emphasys hangszóró IW6.0

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Emphasys IW6.0 (4 oldal) a hangszóró kategóriában. Ezt az útmutatót 6 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/4
I n - Wa l l S p e a k e r s
from EMPHASYS are designed and built
to the highest standards of integrity for
superior durability and power handling.
The IW8.5 offers an 8" aluminum woofer
and pivoting 1” aluminum dome tweeter
for thundering bass, detailed highs and
awesome projection. The IW6.7 has a
61⁄2" aluminum woofer and 1" aluminum
dome tweeter. Additionally, these mod-
els are equipped with boost switches
for bass and treble, making it possible
to tune the speaker response to room
acoustics and listener preferences. The
other models in the series offer com-
binations of soft dome tweeters and
polypropylene woofers for smooth, life-
like response. For home theater and dis-
tributed stereo, in rooms large or small,
the In-Wall Series from EMPHASYS has
it covered.
Positioning the Speakers
EMPHASYS In-Wall Speakers can be used in any
position of a home theater speaker system. A
single speaker can be used for the front center
channel, or a pair can be used for left and right
at the front or rear in the system.
The In-Wall Speaker as a
Center Channel
In-Wall Speakers are designed to blend
seamlessly with other EMPHASYS speakers and
accessories, and to fill the specific needs of
any configuration. To use the In-Wall Speaker for the center channel, be sure to install
it directly above (or below) the TV. Preferably, it should be flush with the screen. The
performance of the entire system will be enhanced if the center channel is aligned as
closely as possible with the horizontal plane of the front left and right speakers.
Using In-Walls as Left and Right Speakers
The In-Wall Speaker, when used in the front left and right positions, should preferably
be installed in vertical orientation with the tweeter above the woofer. To install the
speakers horizontally, be sure the tweeters are located toward the center of the sound
field, with the respective left and right tweeters nearest the TV.
EMPHASYS
Installer's Guide
IW8.5 IW6.7 IW6.5 IW6.0
2
3. Mark the hole. A template for setting the hole is provided in
the box. Position the template in the desired position and outline
it on the wall using a pencil.
4. Cut the hole. CAUTION: This is the most important part of the
installation. If you aren’t certain whether there are any obstruc-
tions in the desired mounting area, use a drywall saw to cut a
small hole at the center of the spot you’ve outlined. Cut at a 45°
angle toward the inside of the hole (See Diagram 3).
You can use the cutout piece to fill the hole again if obstructions
are found. Once the mounting location is deemed to be free of
obstructions, cut the outline at a 90° angle relative to the sur-
face of the wall.
5. If the area in the wall isn’t already insulated, add insulation
material sufficient to fill the cavity. If the insulation material used
is faced with foil or paper, position the foil or paper away from
the speaker.
CAUTION: Speaker components can get hot while playing music at
moderate to high volume levels. There should be nothing at all touch-
ing the speaker. Material in proximity to the back of the speaker must
have at a minimum 1” or 26mm clearance for non-flammable materials
and more for flammable materials like plastic vapor barriers.
Preparing the Surface for Mounting
Precautions for Installation
Careful consideration should be given to the possible presence of
electrical conduits, piping, HVAC duct work and other elements
within the walls before the speakers are installed. If there is any
doubt regarding the most acceptable locations for the speakers,
please consult EMPHASYS Technical Support or the dealer.
New Construction: Unfinished Wall
A new construction bracket, available from your dealer, can be
installed prior to drywall application across studs (up to 24” on-
center) where a speaker will be located. Once the hole is cut and
the drywall is installed, the speaker can be easily installed follow-
ing the instructions for mounting in “Finished Wall” below.
Finished Wall
Prior to the actual installation of the speakers, it will be necessary
to run speaker wire to the locations in which they’ll be mounted.
See your dealer for more information. Then, with the wire in
place, the speakers can be mounted. To ensure a professional
looking result, follow the simple steps described below:
1. Choose the general location for the installation of each speak-
er, being certain that these areas present no obstructions such as
electrical conduit, HVAC duct work or water lines.
2. Find the studs nearest the desired location for the speaker.
EMPHASYS recommends the use of a good stud finder for this
procedure. If you are lining up the speakers to some other object
or molding in the room, be sure to allow for the size of the baffle,
which, extends beyond the mounting hole on all four sides of the
In-Wall Speaker.
CAUTION: The tweeter dome, whether aluminum or silk, can be
damaged through direct contact with fingers or objects. Please be
careful when installing and adjusting the speaker.
The following tips are recommended for use of the In-Wall
Speakers in a home theater configuration:
• If the speaker is being used as a main front channel, the tweeter
should be aimed toward the listener.
• If the speaker is being used as a rear surround speaker, it might
be desirable to aim the tweeter away from the listener. This will
enhance the diffusion of the sound, particularly for ambient
effects.
Speaker Adjustments
Creating a Zone for Optimized Listening
The speakers should be placed so that
they form a “triangular” relationship
with respect to the listening position.
(See Diagram 1) For example, if the
listener’s vantage point is eight feet
from the front speakers, then the
speakers should be eight feet apart.
This will ensure an accurate stereo
image and help minimize the creation
of excessive sound reflections.
Pivoting the Tweeters
Some models of the In-Wall Series speakers are equipped with
pivoting tweeters that make it easy to optimize speaker perfor-
mance to the size and shape of the room. (See Diagram 2) For
example, if the speakers are positioned far from the primary
listening area, aim the tweeters directly toward that area so that
the upper frequencies (which are directional in nature) reach the
listener. If the ideal listening perspective is relatively close to the
speakers, a better balance of frequencies can be achieved by
aiming the tweeters slightly outward, away from the listener.
Diagram 2:
Tweeter
Push Tweeter Here
A=B=C
Ideal
Listening
Zone
B C
A
Left Speaker Right Speaker Center Speaker
TOP VIEW
Diagram 1: Listening Zone
Diagram 3:
Wall Cutout
Painting the Grilles
We recommend painting your grilles prior to installation. If you
decide to paint them in the future, it is best to remove them by
simply detaching them from the speaker. Do not paint the grilles
while they are installed on the speaker.
Before painting, be sure to remove the cloth material from
beneath the grille. Once painted, place the cloth back to its
position beneath the grille.
When painting, be careful not to clog the holes of the grille. The
sound of the speaker will be dramatically reduced if the perfora-
tions in the grille are covered in paint.
EMPHASYS recommends only light spray painting using five parts
thinning agent to one part paint.
3
CAUTION: Excessive tightening may torque the baffle, crack the
wall or cause difficulty in aligning the grille.
4. Reattach the grille onto the speaker baffle.
Installing the Speakers
The In-Wall Speakers feature a mounting system with six swivel-
ing feet for quick, secure installation. Use the following steps:
1. Remove the grille from the speaker baffle.
2. Attach the speaker wire (observing the proper polarity with
your amplifier, matching positive to positive and negative (red)
(black) to negative). Be certain the left channel of the amplifier is
connected to the left speaker, and that the right channel is con-
nected to the right speaker.
3. Be sure the mounting feet are turned inward to clear the
opening, and then insert the speaker into the wall. Position the
speaker into the hole. Note: The speaker is designed to conform
to minor imperfections in the wall’s surface. Tighten the six screws
on the front of the baffle only so much that the speaker is snug
against the drywall. As you tighten the screws, the feet will flip
into an outward position , clamping the drywall (See Diagram 4)
between the feet and the speaker.
Mounting Feet Speaker
Treble Adjustment
The Treble switch allows +3dB of adjustment from the “0” position,
where the most linear frequency response is maintained. If more
treble is desired, simply move the switch to the “+3” position. To
return to the neutral setting, move the switch back to the “0”
position. The Treble switch can be adjusted whenever desired.
(See Diagram 5)
Bass Adjustment
The Bass switch provides +3dB of bass adjustment from the “0”
position, where the flattest bass frequency response is maintained.
For extra bass, move the switch to the “+3” position. To return to
the neutral setting, move the switch back to the “0” position. As
with treble adjustment, the Bass switch can be moved whenever
desired. (See Diagram 5)
Adjusting the Frequency Response for IW8.5 & IW6.7
Diagram 5:
Adjustment Switches
Bass Adjustment Switch
Treble Adjustment Switch
Diagram 4:
Mounting Feet

Termékspecifikációk

Márka: Emphasys
Kategória: hangszóró
Modell: IW6.0

Szüksége van segítségre?

Ha segítségre van szüksége Emphasys IW6.0, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók hangszóró Emphasys

Emphasys

Emphasys DC6.0 Útmutató

16 Szeptember 2024
Emphasys

Emphasys IW6.0 Útmutató

17 Július 2024
Emphasys

Emphasys IC6.0 Útmutató

17 Július 2024

Útmutatók hangszóró

Legújabb útmutatók hangszóró

Behringer

Behringer B2520 PRO Útmutató

10 Április 2025
Marshall

Marshall Willen Útmutató

10 Április 2025
JBL

JBL Control 426LP Útmutató

9 Április 2025
Crestron

Crestron SAROS IC8T Útmutató

8 Április 2025
LD Systems

LD Systems STINGER G3 TMB Útmutató

8 Április 2025
JBL

JBL Conceal C83 Útmutató

8 Április 2025
Crestron

Crestron SAROS ICE4T Útmutató

7 Április 2025
Crestron

Crestron SAROS ICI6T Útmutató

7 Április 2025
Focal

Focal K2 Power M FRAK Útmutató

5 Április 2025
Match

Match UP C42BMW-FRT.3 Útmutató

3 Április 2025