Használati útmutató Extech MG310

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Extech MG310 (12 oldal) a multiméter kategóriában. Ezt az útmutatót 3 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/12
USER MANUAL
Insulation Resistance Tester
WithContinuityandACVoltagemodes
ModelMG310
2 MG310-en-GB_V1.0 12/15
Introduction
Thank you forselectingtheMG310InsulationResistanceTester.Thismetermeasuresinsulation
resistance,continuity,and andAC III AC Voltage. TheMG310isCAT 600V  idealformeasuring
insulatingmaterialsand andelectrical asequipmentsuch transformers,cables,switches, 
appliances.Applications testing, inspection.includemaintenance, and Properuseandcare thisof 
meterwillprovidemanyyearsofreliableservice.
Safety
This Thistesteris indesignedandmanufactured compliancewiththeIEC61010standard. user
manual andincludesdetailedinformationrelatedtothesafeoperation careofthisinstrument.
Pleasereadcarefullybeforeusingtheinstrument.
Please   read and understand this user manual before using the device.
Always   use the device as specified in the user manual, retain the manual for future use and
checkthewww.extech.com   website for newer versions of the user manual.
Misuse    of this device may cause personal injury and damage to the instrument and
connectedequipment.
This   symbol on the instrument indicates that for safe operation the user must use the
instrumentasdescribedintheuser manual.
Dangericons:Alerttoconditionsandactionsthatmaycauseseriousorfatalinjury.
Warningicons:     Alert the user to the potential of electric shock.
Cautionicons:Alerttoconditionsandactionsthatmaycausedamagetotheinstrumentor
thatmayaffecttheinstrumentaccuracy.
Danger
Do   not measure circuits with voltages greater than 750V AC.
Do   not use this instrument in areas where flammable conditions exist.
Do    not use this instrument in areas of high humidity. Do not operate this instrument with
wethands.
Do   not touch conductive sections of the test leads when taking measurements.
When   test leads are shorted and connected to the instruments do not press the TEST button.
Do    not open the battery cover during tests.
Do   not touch the tested circuits or wires during insulation measurements.
3 MG310-en-GB_V1.0 12/15
Warning
If    the instrument exhibits faulty operation please discontinue use and have the instrument
serviced.
Be   extremely careful when the instruments is measuring voltages that exceed 33V AC rms,
46.7VACrms,or70VDC;electricalshockispossible.
When   high resistance measurements are conducted, stray electrical in circuits under test
mustbedischarged.
Do   not replace the batteries when the instrument is wet.
Ensure     secure connections with the test leads and the instrument’s test lead terminals.
Shut    the instrument down before opening the battery compartment.
Caution
Circuits   under test must be completely discharged and isolated from power circuits before
takingresistancemeasurements.
If        the test leads or adaptors need to be replaced due to damage, replace with test leads or
adaptors theof samemodelorelectricalspecifications.
Do   not use the instrument if low battery indicator shows the low battery indicator. If the
instrument not safely.will beusedfor a long storeperiod,pleaseremove batterythe and 
Do   not store or operate the instrument in areas of high temperature, high humidity, flame or
explosivepotentials,orwherestrongelectromagnetic  fields exist.
Clean   the instrument housing with a damp cloth and mild cleaning agent; do not use
abrasivesor solvents.
If   the instrument is wet, please dry before storing.
ElectricalSafetySymbols
Riskofelectrical shock
Doubleinsulationor reinforced insulation
ACMeasurement
Ground

Termékspecifikációk

Márka: Extech
Kategória: multiméter
Modell: MG310

Szüksége van segítségre?

Ha segítségre van szüksége Extech MG310, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek