Használati útmutató Fluke 700PD3

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Fluke 700PD3 (10 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 12 ember találta hasznosnak és 6 felhasználó értékelte átlagosan 4.8 csillagra

PN 602513

July 1996 Rev.3, 11/01

1996-2001 Fluke Corporation. All rights reserved. Printed in USA

15 PSID/G

PRESSURE MODULE

700

P

04

1 bar

100 kPa

RANGE

Low

High

Dierential

100 PSIG

PRESSURE MODULE

700

P

06

7 bar

700 kPa

RANGE

Gage

is1f.eps

Introduction

The Fluke 700PDX Series Pressure Modules measure

positive and negative pressure. The 700PVX modules

measure vacuum. The 700PDX modules work with the Fluke

700 Series Documenting Process Calibrators. The 700PVX

modules work only with the 740 Series Calibrators. Read this

sheet before you use the pressure module. This sheet

contains specifications and information about how to avoid

damaging the pressure module. See the calibrator’s Users

Manual for operating instructions.

Note

If you are using a Fluke-701 or Fluke-702, software

V1.3 or higher is required. See specification

footnote 1.

The pressure module measures pressure or vacuum using

an internal microprocessor. It receives operating power from

and sends digital information to the calibrator.

Gage pressure modules have one pressure fitting and

measure pressure with respect to atmospheric pressure.

Differential pressure modules have two pressure fittings and

measure the difference between the applied pressure on the

high fitting versus the low fitting. A differential pressure

module functions like a gage module when the low fitting is

open.

®

700 Series Dual-Range and

Vacuum Pressure Modules

Instruction Sheet

Termékspecifikációk