Használati útmutató Fluke 771
Fluke
multiméter
771
Olvassa el alább 📖 a magyar nyelvű használati útmutatót Fluke 771 (22 oldal) a multiméter kategóriában. Ezt az útmutatót 12 ember találta hasznosnak és 6.5 felhasználó értékelte átlagosan 4.0 csillagra
Oldal 1/22
771
Milliamp Process Clamp Meter
Calibration Manual
November 2007 Rev. 2, 7/19
© 2007-2019 Fluke Corporation. All rights reserved. Product specifications are subject to change without notice.
All product names are trademarks of their respective companies.
LIMITED WARRANTY AND LIMITATION OF LIABILITY
This Fluke product will be free from defects in material and workmanship for 3 years (one year for cable and
clamp) from the date of purchase. This warranty does not cover fuses, disposable batteries or damage from
accident, neglect, misuse or abnormal conditions of operation or handling. Resellers are not authorized to
extend any other warranty on Fluke’s behalf. To obtain service during the warranty period, send your
defective Meter to the nearest Fluke Authorized Service Center with a description of the problem.
THIS WARRANTY IS YOUR ONLY REMEDY. NO OTHER WARRANTIES, SUCH AS FITNESS FOR A
PARTICULAR PURPOSE, ARE EXPRESSED OR IMPLIED. FLUKE IS NOT LIABLE FOR ANY SPECIAL,
INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LOSSES, ARISING FROM ANY CAUSE
OR THEORY. Since some states or countries do not allow the exclusion or limitation of an implied warranty
or of incidental or consequential damages, this limitation of liability may not apply to you.
Fluke Corporation
P.O. Box 9090
Everett, WA 98206-9090
U.S.A.
Fluke Europe B.V.
P.O. Box 1186
5602 BD Eindhoven
The Netherlands
ООО «Флюк СИАЙЭС»
125167, г. Москва,
Ленинградский проспект дом 37,
корпус 9, подъезд 4, 1 этаж
11/99
i
Table of Contents
Title Page
Introduction ........................................................................................................ 1
Contacting Fluke ................................................................................................ 2
Safety Information .............................................................................................. 2
Symbols ............................................................................................................. 3
Specifications ..................................................................................................... 4
Getting Acquainted with the Meter ..................................................................... 5
Maintenance ....................................................................................................... 7
Cleaning the Meter ........................................................................................ 7
Battery Replacement ..................................................................................... 7
Performance Tests ............................................................................................. 9
Required Equipment ...................................................................................... 9
Testing the Batteries ...................................................................................... 9
Testing the Display ........................................................................................ 10
Display Hold Test ........................................................................................... 10
Backlight Test ................................................................................................ 10
Spotlight LED Test ......................................................................................... 10
Zero Test ....................................................................................................... 10
Accuracy Tests .............................................................................................. 11
Calibration Adjustment ....................................................................................... 12
Adjustment Subroutines ................................................................................. 12
Front Panel Operation for Adjustment ........................................................... 12
Calibration Error Messages ........................................................................... 13
Calibration Adjustment Procedure ................................................................. 13
Temperature Adjustment Procedure ............................................................. 14
Low Range Adjustment Procedure ................................................................ 14
High Range Adjustment Procedure ............................................................... 14
Phase Adjustment Procedure ........................................................................ 15
User Replaceable Parts ..................................................................................... 16
Termékspecifikációk
| Márka: | Fluke |
| Kategória: | multiméter |
| Modell: | 771 |
Szüksége van segítségre?
Ha segítségre van szüksége Fluke 771, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók multiméter Fluke
2 Október 2024
10 Szeptember 2024
10 Szeptember 2024
2 Szeptember 2024
30 Augusztus 2024
24 Augusztus 2024
21 Augusztus 2024
20 Augusztus 2024
20 Augusztus 2024
19 Augusztus 2024
Útmutatók multiméter
- multiméter IWH
- multiméter Kurth Electronic
- multiméter Strex
- multiméter Elma
- multiméter Kewtech
- multiméter Testec
- multiméter Workzone
- multiméter Flir
- multiméter Wago
- multiméter Sanwa
- multiméter Altai
- multiméter Brennenstuhl
- multiméter Högert
- multiméter Cablexpert
- multiméter Stanley
Legújabb útmutatók multiméter
3 Április 2025
3 Április 2025
3 Április 2025
3 Április 2025
3 Április 2025
3 Április 2025
3 Április 2025
28 Március 2025
26 Március 2025
14 Január 2025