Használati útmutató Fluke i410

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Fluke i410 (10 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 5 ember találta hasznosnak és 3 felhasználó értékelte átlagosan 3.6 csillagra

Oldal 1/10
PN 642733 December, 1996 1996 Fluke Corporation. All rights reserved. Printed in U.S.A. Product names are trademarks of their respective companies.
i410/i1010
AC/DC Current Clamp
Service Information
WWarning
To avoid electric shock:
Do not service this Current Clamp unless you are qualified to do so.
The service information provided in this document is for use by quali-
fied personnel only.
Always remove input signals from the Current Clamp before opening
the case.
Be careful when working with voltages that exceed 30V ac rms, 42.4V
pk, or 60V dc.
The Current Clamp is protected throughout by double insulation. When
servicing the Current Clamp, use only specified replacement parts.
Caution
If the Current Clamp is to be Calibrated, you must have a replacement
decal. See the Replacement Parts section for further details.
This Current Clamp contains parts that can be damaged by static dis-
charge. Follow the standard practices for handling static sensitive de-
vices.
Introduction
Service Information covers the following service-related areas for the i410/i1010 AC/DC Current
Clamps:
Product specifications
Required equipment
Performance test procedure and test values
Preparing for calibration
Calibration procedure
Reassembly procedure
Replacement parts
Usually, service information in this document applies to both models (i410 and i1010). Information ap-
plicable to only one model is so noted. For operating information, refer to the Instruction Sheet that came
with the Current Clamp.
®

Termékspecifikációk

Márka: Fluke
Kategória: nincs kategorizálva
Modell: i410

Szüksége van segítségre?

Ha segítségre van szüksége Fluke i410, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek