Használati útmutató Fluke T5-1000

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Fluke T5-1000 (9 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 27 ember találta hasznosnak és 8 felhasználó értékelte átlagosan 4.8 csillagra

PN 686953

March 1998 Rev.1, 9/01

1998-2001 Fluke Corporation. All rights reserved. Printed in U.S.A. Product names are trademarks of their respective companies.

T5-600/T5-1000

Electrical Tester

Service Information

Introduction

This service information sheet provides the following information for the T5-600 and T5-1000 Electrical

Testers (hereafter referred to as "the tester").

•Safety information

•Parts and service information

•Specifications

•Cleaning procedure

•Required equipment

•Performance tests

•Parts and accessories list

•Battery replacement procedure

For operating instructions, refer to the T5-600/T5-1000 Electrical Tester Instruction Sheet.

Safety Information

Warning

To avoid possible electric shock or personal injury, follow these guidelines:

•Do not use the tester if it is damaged or operating abnormally. Protection

may be impaired.

•Before each use:

•Make sure the battery door is closed and latched.

•Inspect the tester and test leads. Look for cracks, missing plastic, exposed

metal, or damaged insulation. Replace damaged test leads before using the

tester.

•Verify the tester’s operation by measuring a known voltage.

•Replace the batteries as soon as the low battery indicator (M) appears.

•Do not use the tester around explosive gas, vapor or dust.

•Do not apply more than the rated voltage, as marked on the tester, between

terminals or between any terminal and earth ground.

•Refer servicing to qualified personnel.

•Use caution when working above 30 V ac rms, 42 V ac peak, or 60 V dc.

•When using the probes, keep your fingers behind the finger guards on the

probes.

•Connect the common test lead before you connect the live test lead.

Disconnect the live test lead first.

•The display will not display hazardous voltages in display hold. The voltage

indicator LED () continues to operate.

®

Termékspecifikációk