Használati útmutató GE UX12B36PSS

Olvassa el alább 📖 a magyar nyelvű használati útmutatót GE UX12B36PSS (4 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 19 ember találta hasznosnak és 10 felhasználó értékelte átlagosan 4.3 csillagra

Oldal 1/4
UX12B36PSS
12” High Backsplash
WARNING To prevent ignition of combustible
materials, the entire back wall above the range
must be protected by a backsplash constructed of
non-combustible material.
This stainless steel backsplash accessory must be
installed in combination with a custom, non-combustible
backsplash built beyond the 12height of the backsplash.
BEFORE YOU BEGIN
Read these instructions completely and carefully.
IMPORTANT Save these instructions
for local inspector’s use.
IMPORTANT Observe all governing
codes and ordinances.
Note to Installer Be sure to leave these
instructions with the consumer.
Note to Consumer Keep these instructions with
your Owner’s Manual for future reference.
This kit provides for the installation of a 12” high
backsplash for 30”, 36” or 48” Professional Ranges
and Rangetops.
Installation
Instructions
31-10690-1 01-18 GEA
TOOLS AND MATERIALS REQUIRED
■Glovestoprotectagainstsharpedges
■T-15and#2Phillips
screwdrivers
■Drillwith3/32”and
9/64”bits
■Safetyglasses
■Level
■Pencil
This Kit Includes
■Wallsupportpanel
■Coverpanel
■Hardwarepackagewith
 –5StainlessSteelTorx15
#8self-tappingscrews
 –5Phillips#2panheadwood
#10screws
INSTALL 12” BACKSPLASH
WARNING This backsplash must be securely
fastened to the wall. Failure to do so could result in
damage or personal injury.
■Installandleveltherangeorrangetopandthe
range hood according to the installation instructions.
■Removethebacksplashpackagingandprotective
film.
■Usealeveltopencilahorizontallineonthewall,1/8”
abovetherangeorrangetop.The1/8”gapallowsthe
cover panel to overlap the wall support panel.
■Locatewallstudsoneachside.Wherestudsarenot
available, plan to use wall anchors (not provided).
■Alignthewallsupportpanelonthemarked
horizontallineandcenteredlefttoright.
■Thewallsupportpanelmustbesecuredtothewall
atall4corners.Usewoodscrews(provided)orwall
anchors (not provided) to secure the support panel
to the wall.
■Placethecoverpaneloverthewallsupportpanel
andsecurewithTorxscrews(provided).Install2
screws on each side.
WallSupportPanel
CoverPanel
Hardware
Package
Install4WoodScrews
InstallT-15
Screws
Wall
Support
Panel
WallSupport
Panel
CoverPanel
Center
Arrow
1/8”

Termékspecifikációk

Márka: GE
Kategória: nincs kategorizálva
Modell: UX12B36PSS

Szüksége van segítségre?

Ha segítségre van szüksége GE UX12B36PSS, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek