Használati útmutató Harley Davidson J04409 (2011)
Harley Davidson
Motor
J04409 (2011)
Olvassa el alább 📖 a magyar nyelvű használati útmutatót Harley Davidson J04409 (2011) (6 oldal) a Motor kategóriában. Ezt az útmutatót 16 ember találta hasznosnak és 8.5 felhasználó értékelte átlagosan 5.0 csillagra
Oldal 1/6
-J04409 2011-10-20
FAT BOY DETACHABLE SADDLEBAGS
GENERAL
Kit Number
88306-07A, 90200616A
Models
For model fitment information, see the P&A Retail Catalog or
the Parts and Accessories section of www.harley-davidson.com
(English only).
Additional Parts Required
All models require separate purchase of Rear Directional
Relocation Kit P/N 69929-07.
Models equipped with Detachable Accessories require separate
purchase of Docking Hardware Kit P/N 88256-07.
Models without Detachable Accessories require separate
purchase of Docking Hardware Kit P/N 53932-03.
Models equipped with Rigid Accessories require separate
purchase of Docking Hardware Kit P/N 88298-07.
Loctite® 243 (Blue) Threadlocker and Sealant P/N 99642-97.
WARNING
The rider's safety depends upon the correct installation of
this kit. Use the appropriate service manual procedures.
If the procedure is not within your capabilities or you do
not have the correct tools, have a Harley-Davidson dealer
perform the installation. Improper installation of this kit
could result in death or serious injury. (00333a)
NOTE
This instruction sheet references service manual information.
A service manual for your model motorcycle is required for this
installation and is available from a Harley-Davidson Dealer.
Kit Contents
See Figure 8 and Table 1.
NOTE
Maximum saddlebag weight capacity is 10 pounds (4.5 Kg.).
WARNING
Federal Motor Vehicle Safety Standard (FMVSS) 108
requires motorcycles to be equipped with rear and side
reflectors. Be sure rear and side reflectors are properly
mounted. Poor visibility of rider to other motorists can
result in death or serious injury. (00336b)
WARNING
The rider's safety depends upon the correct installation of
this kit. Use the appropriate service manual procedures.
If the procedure is not within your capabilities or you do
not have the correct tools, have a Harley-Davidson dealer
perform the installation. Improper installation of this kit
could result in death or serious injury. (00333a)
INSTALLATION
Install Turn Signal Relocation Kit
1. Install the turn signal relocation kit using the instruction
sheet provided in that kit.
Docking Point Installation
1. Refer to the instructions included with the Docking
Hardware Kit.
Install Rear Docking Adapter
NOTE
This procedure only applies to models equipped withnot
detachable accessories.
1. See Figure 1. Insert rear docking adapter (1) into holes in
saddlebag bracket and hold into place.
2. Install rear docking adapter using screw (2) and nut (3).
Tighten snugly.
3. Repeat for other saddlebag.
3
2
1
is05092
Rear docking adapter1.
Screw2.
Nut3.
Figure 1. Install Rear Docking Adapter
1 / 6
Many Harley-Davidson® Parts & Accessories are made of plastics and metals which can be recycled.
-J04409
Please dispose of materials responsibly.
Termékspecifikációk
| Márka: | Harley Davidson |
| Kategória: | Motor |
| Modell: | J04409 (2011) |
Szüksége van segítségre?
Ha segítségre van szüksége Harley Davidson J04409 (2011), tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók Motor Harley Davidson
29 Szeptember 2024
22 Szeptember 2024
17 Szeptember 2024
27 Augusztus 2024
20 Augusztus 2024
4 Augusztus 2024
3 Augusztus 2024
2 Augusztus 2024
31 Július 2024
30 Július 2024
Útmutatók Motor
- Motor Nautilus
- Motor TVS
- Motor Milwaukee
- Motor Sherco
- Motor SMC
- Motor Chang Jiang
- Motor Mercedes-Benz
- Motor Husqvarna
- Motor Danfoss
- Motor Benelli
- Motor Beta
- Motor Joy-It
- Motor Aprilia
- Motor Hyosung
- Motor Anova
Legújabb útmutatók Motor
16 Január 2025
12 Január 2025
11 Január 2025
9 Január 2025
9 Január 2025
4 Január 2025
4 Január 2025
3 Január 2025
1 Január 2025
1 Január 2025