Használati útmutató Hotone Loudster

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Hotone Loudster (4 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 10 ember találta hasznosnak és 5.5 felhasználó értékelte átlagosan 5.0 csillagra

Oldal 1/4
Power Requirement: 18-20V DC center positive
Current Consumption: Min. 4.5A
Input Impedance: 500kΩ
Speaker Output: 4-16 , self-adaptiveΩ
Max. Output Power (19V):
75 Watts @ 4 / 40 Watts @ 8 / 20 Watts @ 16Ω Ω Ω
Dimensions: 190mm(D) x 118.5mm(W) x 53.5mm (H)
Weight: 590g
Specifications
IMPORTANT: TURN ON FIRST, TURN OFF LAST.
Always turn down the volume knob on your power amp before plugging or unplugging
power jacks, cables, etc.
The power amp is protected against the following malfunctions: short-circuit, overheating,
over-voltage, under-voltage and DC issues. ALL OUTPUTS WILL BE MUTED in case the
above malfunctions occur. If this happens, please check the power supply and all cable
connections, then restart the unit and resume normal operation.
The contents of this manual are subject to change without notice.
Controls the output volume
1
2
Power amp input jack, for connecting pedals/preamps
3
18-20V DC adapter plug (center positive)
4
5
Cabinet connector jack (4-16 Ω)
6
Unit on/off switch

Termékspecifikációk

Márka: Hotone
Kategória: nincs kategorizálva
Modell: Loudster

Szüksége van segítségre?

Ha segítségre van szüksége Hotone Loudster, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek