Használati útmutató Hotone Tuner Press

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Hotone Tuner Press (2 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 15 ember találta hasznosnak és 8 felhasználó értékelte átlagosan 5.0 csillagra

Oldal 1/2
Pitch detection accuracy: ±0.01 Cent
Pot Resistance (EXP out): 10k Ohms
Input Impedance: 1M Ohms 10k Ohms/
Output Impedance: 1k Ohms
Current Consumption: Max 70mA
Dimensions: 81mm (W) x 162mm (D) x 61mm (H)
Weight: 606g
Specifications
Scan the QR code for manuals in other languages.
感谢您购买 Hotone产品
请扫描上⽅⼆维码获取其他语⾔说明书。
In the interest of product improvement, the specifications and/or
the content of products (including but not limited to appearances,
packaging design, manual content, accessories, size, parameters
and display screen), are subject to change without prior notice.
Please check with local supplier for exact offers. Specifications and
features (including but not limited to appearances, colors and size)
may vary by model owing to environmental factors, and all images
are illustrative.
Buffer Setting & USB Interface
1. Remove two screws from the compartment with a phillips screwdriver.
2. Remove the compartment cover.
You can choose whether to enable the buffer circuit
by using the two-position switch shown in the figure.
USB interface: used to connect to the computer for
firmware update.
Follow the software instruction to update the firmware.
ONOFF
Buffer

Termékspecifikációk

Márka: Hotone
Kategória: nincs kategorizálva
Modell: Tuner Press

Szüksége van segítségre?

Ha segítségre van szüksége Hotone Tuner Press, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek