Használati útmutató Ikelite 200DL
Olvassa el alább 📖 a magyar nyelvű használati útmutatót Ikelite 200DL (35 oldal) a kamera kategóriában. Ezt az útmutatót 13 ember találta hasznosnak és 7 felhasználó értékelte átlagosan 4.6 csillagra
Oldal 1/35
Product Registration
Please register your product within 15 days of purchase. Our product
registration database is the quickest way for us to contact you in the
event of a product update.
To register, send a photo of the above registration label to us via
ikelite@ikelite.com along with your name, address, and phone
number.
200DL Underwater Housing for Sony Alpha a1,
a7S III
Product # 71476
2
Introduction
Thank you for your purchase of Ikelite products.
Our primary focus is to provide quality, professional grade products
for use in and under water. Our products are designed, manufactured,
and distributed from our sole facility in Indianapolis, USA where we
started in 1962.
We are available if you have any questions or want photo advice.
Send us an email 24 hours a day to ikelite@ikelite.com. We strive to
reply within 1 business day.
An electronic version of this instruction manual is available for
download via the product page on our website:
https://www.ikelite.com
In the Box
• Housing
• Camera Mount for Sony a1 # 95419
• Camera Mount for Sony a7S III # 95415 (installed)
• Main O-ring # 0132.59 (installed)
• Port O-ring # 0132.45 (installed)
• Zoom Gear Retainer # 0072.42 (installed)
• Port Hole Cover # 0200.92 (installed)
• Waterproof Bulkhead Cap # 9104.7 (installed)
• Base with Left-Hand Quick Release Handle (installed)
• Hardware Set for Base with Handle # 9523.23 (installed)
• Tool for Zoom Gear Retainer # 0945.06
• .050” Hex Key # 0945.11
• Silicone Lubricant 1cc tube
3
Important Notices
»This housing requires a compatible DL lens port for waterproof
operation (sold separately). The housing is not waterproof
without a DL lens port attached.
»A bulkhead cap or sync cord must be attached to the housing
bulkhead for waterproof operation. Never submerge the
housing in water without either a sync cord or bulkhead cap
attached.
»Do not pull the shutter trigger without a camera installed. You
may accidentally detach or damage the control spring.
»Never leave a housing in a rinse tank, even if it is the only
system in the tank. Accidental damage may occur when the
user walks away from a housing while it is in the rinse tank.
»Do not use alcohol, cleaning agents, spray lubricants, Rain-X,
or other solvents on the housing or lens port. Use of an
incompatible chemical compound can damage the plastic and
o-rings, and may result in leaking.
»If you will be using the system in strong surf it is
recommended to draw a vacuum on the housing using the
optional vacuum pump (sold separately).
Termékspecifikációk
| Márka: | Ikelite |
| Kategória: | kamera |
| Modell: | 200DL |
Szüksége van segítségre?
Ha segítségre van szüksége Ikelite 200DL, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók kamera Ikelite
28 Augusztus 2024
Útmutatók kamera
- kamera EVE
- kamera Anker
- kamera Strex
- kamera ARRI
- kamera Bushnell
- kamera Seek Thermal
- kamera Optoma
- kamera Fujifilm
- kamera Ansco
- kamera KanDao
- kamera Toshiba
- kamera BenQ
- kamera Exakta
- kamera SilverCrest
- kamera Eufy
Legújabb útmutatók kamera
10 Április 2025
9 Április 2025
3 Április 2025
1 Április 2025
29 Március 2025
29 Március 2025
28 Március 2025
27 Március 2025
27 Március 2025
20 Március 2025