Használati útmutató JDC Skywatch Log

JDC Időjárás állomás Skywatch Log

Olvassa el alább 📖 a magyar nyelvű használati útmutatót JDC Skywatch Log (6 oldal) a Időjárás állomás kategóriában. Ezt az útmutatót 12 ember találta hasznosnak és 6.5 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF

Oldal 1/6

- 1 -

 Thank you for purchasing the JDC SkywatchLog

interface for the SKYWATCH® GEOS N°11. This

system will connect your GEOS to your PC, enabling

you to download all stored data, view historical and

real-time data from your GEOS, and make calibration

adjustments to the instrument itself.

Items Included:

 SKYWATCHLOG CD-ROM

 Cable Adapter (Either USB or RS232 Port

connector)

 Velcro strap

Required:

 GEOS N°11 instrument

 PC with USB or RS232 port

 Windows 98 or higher

INSTALLATION INSTRUCTIONS

1. INSTALL SKYWATCHLOG PROGRAM

** **DO NOT CONNECT THE ADAPTER TO THE PC YET

 Insert the SKYWATCHLOG CD-ROM

 If the setup does not start automatically, select

“My Computer” and double-click on the CD drive to

start the setup.

 “Copying Files, please wait” is displayed. The

Setup program is copying les to a temporary

folder for use during installation.

 The Welcome screen is displayed; click “OK” to

continue the setup process.

 “SkywatchLog Setup” window is displayed. The

default location for the program and data is

displayed as “C: SkywatchLog”. \ProgramFiles\

Change this directory if you wish, then click the

setup button.

 The setup will include the SkywatchLog into a

program group (on the “Start” menu of your PC) for

quick access to the program.

 Install is running…

 The setup will create the program icons and install

the program. Select “OK” when complete.

 The installation of the SkywatchLog program is

now complete; you must next setup the

USB/RS232 port hardware.

2. INSTALL THE USB OR RS232 CONVERTER

** INSERT THE CABLE ADAPTER INTO DESIRED

PORT, DO NOT CONNECT THE GEOS **

- 2 -

If you have a RS232 CONVERTER, you can

directly go to the point 3.

 Launch program « that is in: CDM_Setup.exe »

« Your CD driver:\Drivers_USB\Win_XP_2000\ ».

 You might be asked to confirm the program execution.

Confirm it by clicking on “ ”. Run

 The Driver software will be installed. Click “OK".

 When you plug your USB connection, a window

«Installation Assistant for new hardware detected»

might be displayed.

 Click on «No, not for this time », and on «next». Please

note that depending on your Windows set up, this

window may not appear.

 Window «Installation Assistant for new hardware

detected» is displayed.

 Wizard“Found New Hardware ” screen will appear.

Select “Install from a list or specific location” and select

NEXT.

A) Select «Sear for the best driver in these locations». ch

B) Select «Include this location in the search».

C) Click on «Search».

 Once in «Select a folder», look for the driver

folders that are on the SkywatchLog CD and select

the one corresponding to your Windows system.

Click on «OK», and on «Next».

 Install is in progress.

 Installation is now completed. You have just

installed the USB Converter. Click on «Finish».

- 3 -

3. Install USB Serial Port (COM)

 Now you need to install the USB Serial Port (COM).

Proceed the same way than for the USB Converter

that you have just installed. Window «Installation

Assistant for new hardware detected» is displayed.

Click on «No, not this time », and on «next». Please

note that depending on your Windows set up, this

window may not appear.

 “Found New Hardware” screen will appear. Select

“Install from a list or specific location” and select

NEXT.

A) Select «Sear for the best pilot in these locations».

B) Select «Include this location in the search».

C) Click on «Search».

 Once in «Select a folder», look for the drivers that

are on the SkywatchLog CD and select the ones

corresponding to your Windows system. Click on

«OK», and on «Next».

 Install is in progress.

 Installation is now completed. Click on «Finish».

PROGRAM INSTRUCTIONS

You can now run the SkywatchLog software.

(Default location is START - ALL PROGRAMS -> >

SKYWATCHLOG)

1. CONNECT THE GEOS N°11 TO THE PC

 The PC adapter has the USB or RS232 connector on

one end, and a square at disc on the other. The disc

is what captures the data from the GEOS, with no plug.

 To connect, rst turn on the GEOS

Termékspecifikációk

Márka:	JDC
Kategória:	Időjárás állomás
Modell:	Skywatch Log

Szüksége van segítségre?

Ha segítségre van szüksége JDC Skywatch Log, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek

Az Ön neve*

Az Ön e-mail címe*

Írja ide kérdését

Útmutatók Időjárás állomás JDC

JDC GEOS Útmutató

14 Augusztus 2024

JDC Skywatch GEOS No 11 Útmutató

14 Augusztus 2024

JDC Skywatch Log Útmutató

13 Augusztus 2024

Útmutatók Időjárás állomás

Legújabb útmutatók Időjárás állomás

TFA 35.1044.55.IT Útmutató

31 Március 2025

Bresser Translucidus NV Útmutató

27 Március 2025

Bresser ClimaTemp TB Útmutató

27 Március 2025

Ventus K0382 Útmutató

14 Január 2025

Alecto WS-1200 Útmutató

13 Január 2025

TFA 20.1082.17 Útmutató

13 Január 2025

Oregon Scientific BAR310HG Útmutató

12 Január 2025

Oregon Scientific BAR 898 Útmutató

12 Január 2025

Auriol AHFL 433 B2 Útmutató

12 Január 2025

Davis Weatherlink Touch Console Útmutató

11 Január 2025