Használati útmutató Jensen MPR529

Jensen Vevő MPR529

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Jensen MPR529 (14 oldal) a Vevő kategóriában. Ezt az útmutatót 6 ember találta hasznosnak és 3.5 felhasználó értékelte átlagosan 4.3 csillagra

Oldal 1/14
INSTALLATION/OWNER'S MANUAL
AM/FM Receiver with Bluetooth
MPR529
2
MPR529 INSTALLATION
Preparation
Please read entire manual before installation.
Before You Start
Disconnect negative battery terminal. Consult a qualified technician for instructions.
Avoid installing the unit where it would be subject to high temperatures, such as from
direct sunlight, or where it would be subject to dust, dirt or excessive vibration.
Getting Started
Remove trim ring from unit.
Remove 2 transit screws located on top of the unit.
Insert the supplied keys into the slots as shown, and slide the unit out of the mounting
sleeve.
Install mounting sleeve into opening, bending tabs to secure.
Connect wiring harness and antenna. Consult a qualified technician if you are unsure.
Certain vehicles may require an installation kit and/or wiring
harness adapter (sold separately).
Test for correct operation and slide into mounting sleeve to secure.
Snap trim ring into place.
TYPICAL FRONT-LOAD
MOUNTING METHOD
3
MPR529 INSTALLATION
Wiring Diagram
FUSE
When replacing the
fuse, make sure new
fuse is the correct type
and amperage. Using
an incorrect fuse could
damage the radio.
The unit uses
one 10 amp ATM
located beside the g
connector.
10 AMP AGC Fuse
Antenna
Connector

Termékspecifikációk

Márka: Jensen
Kategória: Vevő
Modell: MPR529

Szüksége van segítségre?

Ha segítségre van szüksége Jensen MPR529, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek