Használati útmutató Joranalogue Enhance 2

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Joranalogue Enhance 2 (6 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 19 ember találta hasznosnak.

ENHANCE 2

STEREOPHONIC

ENHANCER

1

INTRODUCTION

Moving from mono to stereo sound: a logical

progression for any synthesist looking to expand

their sonic palette. Making use of two audio

channels, rather than just one, quite literally adds

another dimension to the capabilities of a

synthesiser.

Unfortunately, controlling stereo signals can be a

challenge within a modular system. This

realisation led to the development of Enhance 2:

a convenient - yet highfidelitytool for stereo

enhancement. It can be used to adjust balance,

width and spectral content, while also opening

up a world of mid/side processing; all under

voltage control and in just 8 HP.

The primary stereo parameters are balance

(moving the sound left right) and width or

(making it narrower or wider). The balance circuit

uses a true constant-power gain law, while the

width stage allows for seamless transitions from

pure mono to extrawide stereo.-

In addition, control is provided by a pair of tone

unique, wide- rangingmid/side voltage

controlled tilt filters with selectable corner

frequency. These make ‘cleaning up’ a muddy-

sounding mix straightforward, but also provide

unique binaural effects when modulated.

Mid/side processing encodes the stereo signals

into one containing only the mono material

(mid), and another containing the differences

between both channels (side). Apart from the

internal tilt filters, mid/side outputs also enable

external signal processing such as compression

or reverberation. An integrated mid/side decoder

returns the results back to standard stereo.And

at all times, a LED bar phasemeter ensures that

phase correlation can be easily maintained.

S tereo field modulation, mid/side equalisation

and beyond; Enhancebringsanalogue 2 true

s tereo control to Eurorackthe world.

CONTENTS

In the Enhance 2 box, you’ll find:

Product card, stating serial number and

production batch.

16---to10pin Eurorack power cable.

Mounting hardware: two black M3 x 6 mm

hex screws, two black nylon washers and a

hex key.

T 2 he Enhancemodule itselfprotective , in a

cotton bag.

If any of these items are missing, please contact

your dealer or support@joranalogue.com.

Termékspecifikációk