Használati útmutató Joranalogue Contour 1

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Joranalogue Contour 1 (7 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 12 ember találta hasznosnak és 6.5 felhasználó értékelte átlagosan 4.6 csillagra

Oldal 1/7
CONTOUR 1
SLEW LIMITER/FUNCTION GENERATOR
1
INTRODUC TIO N
For decades, the voltage controlled slew limiter
has been a staple of modular synthesisers. With
its extreme versatility, it can be used to slew
control voltages (CVs), create envelopes, -as a low
frequency or audio oscillator and much more.
Today, Contour 1 brings a fresh approach to this
classic circuit. I t delivers much improved
performance and control by incorporating
modern design techniques.
At its most basic, a slew limiter slows down the
rate of voltage change in a signal . On Contour 1,
the rising and falling rates can be individually set
using sliders and CV modulation.
The gate and trigger inputs allow the module to
be used as a function generator: create snappy
attack- -release (AR) and attack decay (AD)
envelopes, with slope times ranging from 500 µs
to 30 seconds. The dedicated gate input makes
it easy to generate V envelopes from any +10
signal source. Using the large tactile push button,
AD envelopes can be manually triggered. A
trigger will also reset the output voltage.
When set to loop mode, Contour 1 will
continually re-trigger itself. In this mode, it fulfils
the role of - -a variable shape low frequency
oscillator (LFO) or temperature-stable voltage
controlled oscillator (VCO) in the audio range.
B oth the rising and falling slopes can be
individually bent, from concave through linear to
convex. While doing so, the deviation in slope
time, and thus oscillation frequency, to a is kept
minimum. Since the bend parameters are
separately voltage controllable, boundless
modulation possibilities . present themselves
Explore anything from shape-shifting envelopes
to Contourrich VCO timbres: -1 will make you re
think what a slew limiter can do.
CONTENTS
In the Contour find: 1 box, you’ll
Product card, stating serial number and
production batch.
16- - -to 10 pin Eurorack power cable.
Mounting hardware: two black M3 x 6 mm
hex screws, two black nylon washers and a
hex key.
T 1 he Contour module itself, in a protective
cotton bag.
If any of these items are missing, please contact
your dealer or support@joranalogue.com.

Termékspecifikációk

Márka: Joranalogue
Kategória: nincs kategorizálva
Modell: Contour 1

Szüksége van segítségre?

Ha segítségre van szüksége Joranalogue Contour 1, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek