Használati útmutató Kramer VS-21DTP

Kramer kapcsoló VS-21DTP

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Kramer VS-21DTP (1 oldal) a kapcsoló kategóriában. Ezt az útmutatót 16 ember találta hasznosnak és 8.5 felhasználó értékelte átlagosan 4.8 csillagra

Letöltés PDF

Oldal 1/1

VS-21DTP Quick Start

P/N:

2900- 300924QS

Rev:

Scan for full manual

VS-21DTP Quick Start Guide

This guide helps you install and use your VS-21DTP for the rst time.

Go to www.kramerav.com/downloads/VS-21DTP to download the latest user manual and check if firmware

upgrades are available.

Step 1: Check in the b what’s ox

VS-21DTP 2xHDMI to HDBT Standby

Switcher/POE

1 Bracket set

4 Rubber feet

1 Power adapter and cord

1 Quick start guide

Step 2: Get to know your -21DTP VS

Feature

Function

ACTIVE INPUT LEDs (1 to 2)

Lights green when the input active. Both LEDs ash when no input is active. is

PRIORITY LED

Lights green when DIP-switch 1 is set to PRIORITY (down).

LAST CONNECTED LED

Lights green when DIP-switch 1 is set to LAST CONNECTED (up).

POE STATUS LED

Lights green when the unit provides PoE.

ON LED

Lights green when the unit is powered on via power adapter or PoE.

INPUT HDMI Connectors (1 to 2) ™

Connect to an HDMI source.

HDBT OUT RJ-45 Connector

Connect to an HDBaseT receiver (for example, ) and provide or accept TP-580R

power (bidirectional PoE).

LAST CONN/PRIORITY DIP-switch 1

Set DIP-switch 1 up (o) to select the Last Connected input.

Set DIP-switch 1 down (on) to select the Priority input determined by DIP-switch

DEF 1/DEF 2 DIP-switch 2

Set DIP-switch 2 up (o) to dene INPUT 1 as the default (priority) input.

Set DIP-switch 2 down (on) to dene INPUT 2 as the default (priority) input.

REMOTE 3-pin Terminal Block Connector

Connects to optional contact closure switches 1 or 2 for manual switching (by

momentary contact between the desired pin and the G pin).

48V DC Power Terminal Block Connector

Connect to the Kramer power adapter.

The terms HDMI, HDMI High-Denition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.