Használati útmutató Lewitt LCT 340
Olvassa el alább 📖 a magyar nyelvű használati útmutatót Lewitt LCT 340 (1 oldal) a telefon kategóriában. Ezt az útmutatót 19 ember találta hasznosnak és 10 felhasználó értékelte átlagosan 4.9 csillagra
Oldal 1/1
// LCT 340
QUICKSTART GUIDE
BRUTALLY HONEST
BEAUTIFULLY CLEAR
PROFESSIONAL MULTIPURPOSE
PENCIL MICROPHONE
// Getting started
1 Connect your microphone to your mixing console, audio interface or microphone
preamplifi er using a 3-pin XLR cable.
2 Supply the LCT 340 with 48V phantom power.
3 Choose your settings.
4 You are ready to go!
// Overview
// Externally polarized small diaphragm (0.8“ / 20 mm) condenser microphone
// Cardioid polar pattern for effective isolation of the main sound source
// Interchangeable capsules for cardioid and omnidirectional pattern
// Flat frequency response
// High dynamic range and very low self-noise
// 4 low-cut settings: linear, 40 Hz (12 dB/oct), 150 Hz (6 dB/oct), 300 Hz (6 dB/oct)
// 4 pre-attenuation settings: 0 dB, -6 dB, -12dB and -18 dB
// Illuminated user interface for easy handling even in dark environments
// Gold plated & corrosion-resistant 3-pin XLR output connector
Top applications // Acoustic instruments, drums and percussion, wind instruments
// User interface
1 Illuminated attenuation display // The currently active attenuation setting is illuminated.
2 Recessed attenuation slide switch // Choose between 0 dB, -6 dB, -12 dB and -18 dB by adjusting the slide switch. Attenuation
is used in high SPL environments in order to prevent clipping of the microphone, mixer and other audio equipment.
3 Illuminated low-cut fi lter display // The currently active low-cut setting is illuminated.
4 Recessed low-cut fi lter slide switch // Choose between linear, 40 Hz (12 dB/oct), 150 Hz (6 dB/oct) and 300 Hz (6 dB/oct)
by adjusting the slide switch. Low-cut fi lters eliminate unwanted low frequency noise such as structure borne noise, wind and
handling noise. Do not forget to use the supplied windshield if suitable.
5 Recessed LED on/off push button // By briefl y pressing the recessed push button the LED illumination can be turned on or off.
// Please Note
// The capsule is a sensitive, high precision component. Make sure you do not drop it from high heights and avoid strong mechanical
stress and force.
// To ensure high sensitivity and best sound reproduction of the microphone, avoid exposing it to moisture, dust or extreme
temperatures. Use supplied windshield if suitable.
// Do not apply excessive force on the switches or the connected cable.
// When disconnecting the microphone cable, grasp the connector and do not pull the cable.
// Do not attempt to modify or fi x the microphone, as it would void your product warranty.
// The casing of the microphone can be cleaned easily using a wet cloth,
never use alcohol or another solvent for cleaning.
// The windshield can be washed with soap water, if necessary.
READ THE
FULL MANUAL!
LEARN EVERYTHING ABOUT YOUR LCT 340
www.lewitt-audio.com/resources/manuals/LCT-340.pdf
LEWITT
®
Burggasse 79
1070 Vienna
Austria
www.lewitt-audio.com
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received,
including interference that may cause undesired operation.
1
2
3
4
5
Termékspecifikációk
| Márka: | Lewitt |
| Kategória: | telefon |
| Modell: | LCT 340 |
Szüksége van segítségre?
Ha segítségre van szüksége Lewitt LCT 340, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók telefon Lewitt
7 Szeptember 2024
3 Szeptember 2024
3 Szeptember 2024
3 Szeptember 2024
3 Szeptember 2024
3 Szeptember 2024
Útmutatók telefon
- Anker
- BeeWi
- Draytek
- Audioline
- CTA Digital
- CSL
- Viking
- Vimar
- OnePlus
- KPN
- Alcatel
- Jacob Jensen
- Binatone
- HMD
- Airlive
Legújabb útmutatók telefon
4 Április 2025
31 Március 2025
30 Március 2025
18 Március 2025
15 Január 2025
14 Január 2025
14 Január 2025
13 Január 2025
13 Január 2025
13 Január 2025