Használati útmutató LiftMaster TLS1CARD

Olvassa el alább 📖 a magyar nyelvű használati útmutatót LiftMaster TLS1CARD (12 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 22 ember találta hasznosnak.

/ 12 PDF

1

TLS1CARD

TIMER LIGHT STATUS OPTION CARD

The TLS1CARD has different configuration modes that determine how the TLS1CARD will function.

MODE COMPARABLE MODIFICATION DESCRIPTION

90-T1, 90-515774, or RDGRNCARD • 3 relay outputs (R1, R2, and R3) with optional flashing for R1TCP Mode 1

• Adjustable Pre-Warning

• R1 output on during Pre-Warning, while in motion, and at an

undefined stopped position

• R2 output on at fully open and at open mid-stop

• R3 output on while closing only

90-T2 • 3 relay outputs (R1, R2, and R3)TCP Mode 2

• Adjustable Pre-Warning

• R1 output on during Pre-Warning only

• R2 output on at fully open

• R3 output on only when a special input to open has been used to

open the door which does not activate the Timer-to-Close

TCP Mode 390-T4 • 3 relay outputs (R1, R2, and R3)

• Adjustable Pre-Warning

• R1 output on during Pre-Warning only

• R2 output on at fully open and at open mid-stop

• R3 output on while in motion

90-RGLFCIR or 90-HDFLASH2 • TCP Mode 42 relay outputs (R1, R2) with optional flashing for R1

• Adjustable Pre-Warning

• R1 output on during Pre-Warning and while closing

• R2 output on at fully open

90-T3 • 3 relay outputs (R1, R2, and R3)TCP Mode 5

• Adjustable Pre-Warning

• R1 output on at all times except fully open and fully closed

• R2 output on at fully open

• R3 output on only when a special input to open has been used to

open the door which does not activate the Timer-to-Close

90-L3FLASH • 3 relay outputs (R1, R2, and R3) with optional flashing for R1TC Mode 1

• R1 output on while in motion

• R2 output on at fully open and at open mid-stop

• R3 output on at fully open, open mid-stop, and at an undefined

stopped position

90-42104 This mode allows a second set of external, track mounted limits to act SP Mode 1

as primary or backup for the operator’s open, close, and safety limits.

NOTE: It is not required that all three inputs have a switch connected to

the TLS1CARD. Either the external close, external safety, external open,

or all three may be used.

Termékspecifikációk