Használati útmutató Makita 6402
Makita
Csavaros gép
6402
Olvassa el alább 📖 a magyar nyelvű használati útmutatót Makita 6402 (32 oldal) a Csavaros gép kategóriában. Ezt az útmutatót 11 ember találta hasznosnak és 6 felhasználó értékelte átlagosan 5.0 csillagra
Oldal 1/32
GB
Drill Instruction Manual
F
Perceuse Manuel d’instructions
D
Bohrmaschine Betriebsanleitung
I
Trapano Istruzioni per l’uso
NL
Boormachine Gebruiksaanwijzing
E
Taladro Manual de instrucciones
P
Berbequim Manual de instruções
DK
Boremaskine Brugsanvisning
GR Τρυπάνι Οδηγίες χρήσεως
6402 DP4700
6402
DP4700
2
7
8
9
8
10
11
3
12
4
5
6
6
1 2
3 4
5 6
3
ENGLISH (Original instructions)
Explanation of general view
1 Low
2 High
3 Speed control screw
4 Switch trigger
5 Lock button
6 Reversing switch lever
7 Side grip
8 Tighten
9 Chuck key
10 Sleeve
11 Ring
SPECIFICATIONS
Model 6402 DP4700
Capacities
Steel ....................................................................................................... 10 mm 13 mm
Wood ...................................................................................................... 21 mm 36 mm
No load speed (min–1) ............................................................................... 0 – 1,200 0 – 550
Overall length ............................................................................................ 264 mm 275 mm
Net weight .................................................................................................. 1.5 kg 2.2 kg
Safety class ................................................................................................ /II /II
• Due to our continuing program of research and devel-
opment, the specifications herein are subject to change
without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
Intended use
The tool is intended for drilling in wood, metal and plastic.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and can
only be operated on single-phase AC supply. They are
double-insulated in accordance with European Standard
and can, therefore, also be used from sockets without
earth wire.
GEA010-1
General Power Tool Safety Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and instructions for future refer-
ence.
GEB001-6
DRILL SAFETY WARNINGS
1. Use auxiliary handle(s), if supplied with the tool.
Loss of control can cause personal injury.
2. Hold power tool by insulated gripping surfaces,
when performing an operation where the cutting
accessory may contact hidden wiring or its own
cord. Cutting accessory contacting a “live” wire may
make exposed metal parts of the power tool “live”
and could give the operator an electric shock.
3. Always be sure you have a firm footing.
Be sure no one is below when using the tool in
high locations.
4. Hold the tool firmly.
5. Keep hands away from rotating parts.
6. Do not leave the tool running. Operate the tool
only when hand-held.
7. Do not touch the drill bit or the workpiece imme-
diately after operation; they may be extremely
hot and could burn your skin.
8. Some material contains chemicals which may be
toxic. Take caution to prevent dust inhalation
and skin contact. Follow material supplier safety
data.
SAVE THESE INSTRUCTIONS.
WARNING:
DO NOT let comfort or familiarity with product
(gained from repeated use) replace strict adherence
to safety rules for the subject product. MISUSE or
failure to follow the safety rules stated in this instruc-
tion manual may cause serious personal injury.
FUNCTIONAL DESCRIPTION
CAUTION:
• Always be sure that the tool is switched off and
unplugged before adjusting or checking function on the
tool.
Switch action (Fig. 1)
CAUTION:
• Before plugging in the tool, always check to see that
the switch trigger actuates properly and returns to the
“OFF” position when released.
To start the tool, simply pull the switch trigger. Tool speed
is increased by increasing pressure on the switch trigger.
Release the switch trigger to stop.
For continuous operation, pull the switch trigger and then
push in the lock button.
To stop the tool from the locked position, pull the switch
trigger fully, then release it.
A speed control screw is provided so that maximum tool
speed can be limited (variable).
Turn the speed control screw clockwise for higher speed,
and counterclockwise for lower speed.
Reversing switch action
For Model DP4700 (Fig. 2)
This tool has a reversing switch to change the rotational
direction. Move the reversing switch lever to the posi-
tion for clockwise (forward) rotation or the position for
counterclockwise (reverse) rotation.
Termékspecifikációk
| Márka: | Makita |
| Kategória: | Csavaros gép |
| Modell: | 6402 |
Szüksége van segítségre?
Ha segítségre van szüksége Makita 6402, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók Csavaros gép Makita
12 Október 2024
5 Október 2024
4 Október 2024
4 Október 2024
2 Október 2024
2 Október 2024
27 Szeptember 2024
24 Szeptember 2024
24 Szeptember 2024
21 Szeptember 2024
Útmutatók Csavaros gép
- Csavaros gép Urrea
- Csavaros gép Cleco
- Csavaros gép Cotech
- Csavaros gép HiKOKI
- Csavaros gép Greenworks
- Csavaros gép Dremel
- Csavaros gép Trotec
- Csavaros gép Biltema
- Csavaros gép Omega
- Csavaros gép Metabo
- Csavaros gép MSW
- Csavaros gép Truper
- Csavaros gép Hilti
- Csavaros gép Yato
- Csavaros gép Bavaria By Einhell
Legújabb útmutatók Csavaros gép
13 Január 2025
12 Január 2025
12 Január 2025
11 Január 2025
5 Január 2025
5 Január 2025
31 December 2025
30 December 2025
30 December 2025
29 December 2024