Használati útmutató Makita TL065DZ
Makita
Csavaros gép
TL065DZ
Olvassa el alább 📖 a magyar nyelvű használati útmutatót Makita TL065DZ (12 oldal) a Csavaros gép kategóriában. Ezt az útmutatót 8 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra
Oldal 1/12
INSTRUCTION MANUAL
Cordless Angle Impact Driver /
Cordless Angle Impact Wrench
TL064D / TL065D
ENGLISH: Original instructions
Read before use.
2 ENGLISH
SPECIFICATIONS
Model: TL064D
Fastening capacities Machine screw 4 mm - 8 mm
Standard bolt M4 - M12
High tensile bolt M4 - M8
No load speed 0 - 2,000 min-1
Impacts per minute 0 - 3,000 min-1
Maximum fastening torque 60 N•m
Overall length 361 mm - 380 mm
Rated voltage D.C. 10.8 V - 12 V max
Standard battery cartridge BL1015 / BL1016 / BL1020B / BL1021B / BL1040B / BL1041B
Charger DC10SA / DC10SB / DC10WC / DC10WD
Net weight 1.2 - 1.6 kg
Model: TL065D
Fastening capacities Standard bolt M4 - M12
High tensile bolt M4 - M8
Square drive 9.5 mm
No load speed 0 - 2,000 min-1
Impacts per minute 0 - 3,000 min-1
Maximum fastening torque 60 N•m
Overall length 361 mm - 380 mm
Rated voltage D.C. 10.8 V - 12 V max
Standard battery cartridge BL1015 / BL1016 / BL1020B / BL1021B / BL1040B / BL1041B
Charger DC10SA / DC10SB / DC10WC / DC10WD
Net weight 1.2 - 1.6 kg
• Due to our continuing program of research and development, the specications herein are subject to change
without notice.
• Specications and battery cartridge may differ from country to country.
• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
Symbols
The following show the symbols used for the equip-
ment. Be sure that you understand their meaning before
use.
Read instruction manual.
Ni-MH
Li-ion
Only for EU countries
Do not dispose of electric equipment or
battery pack together with household waste
material!
In observance of the European Directives,
on Waste Electric and Electronic
Equipment and Batteries and Accumulators
and Waste Batteries and Accumulators
and their implementation in accordance
with national laws, electric equipment and
batteries and battery pack(s) that have
reached the end of their life must be col-
lected separately and returned to an envi-
ronmentally compatible recycling facility.
Intended use
The tool is intended for screw driving in wood, metal
and plastic.
Noise
The typical A-weighted noise level determined accord-
ing to EN62841:
Model TL064D
Sound pressure level (L
pA) : 91 dB(A)
Sound power level (L
WA) : 102 dB (A)
Uncertainty (K) : 3 dB(A)
Model TL065D
Sound pressure level (L
pA) : 90 dB(A)
Sound power level (L
WA) : 101 dB (A)
Uncertainty (K) : 3 dB(A)
The noise level under working may exceed 80 dB (A).
WARNING: Wear ear protection.
3 ENGLISH
Vibration
The vibration total value (tri-axial vector sum) deter-
mined according to EN62841:
Model TL064D
Work mode: impact tightening of fasteners of the maxi-
mum capacity of the tool
Vibration emission (a
h) : 15.0 m/s2
Uncertainty (K) : 1.5 m/s
2
Model TL065D
Work mode: impact tightening of fasteners of the maxi-
mum capacity of the tool
Vibration emission (a
h) : 18.0 m/s2
Uncertainty (K) : 1.5 m/s
2
NOTE: The declared vibration emission value has
been measured in accordance with the standard test
method and may be used for comparing one tool with
another.
NOTE: The declared vibration emission value
may also be used in a preliminary assessment of
exposure.
WARNING: The vibration emission during actual
use of the power tool can differ from the declared
emission value depending on the ways in which the
tool is used.
WARNING: Be sure to identify safety measures
to protect the operator that are based on an estima-
tion of exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it is
running idle in addition to the trigger time).
EC Declaration of Conformity
For European countries only
The EC declaration of conformity is included as Annex A
to this instruction manual.
SAFETY WARNINGS
General power tool safety warnings
WARNING: Read all safety warnings, instruc-
tions, illustrations and specications provided
with this power tool. Failure to follow all instructions
listed below may result in electric shock, re and/or
serious injury.
Save all warnings and instruc-
tions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Work area safety
1. Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
2. Do not operate power tools in explosive atmo-
spheres, such as in the presence of ammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
3. Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
Electrical Safety
1. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodied plugs and matching outlets will
reduce risk of electric shock.
2. Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of elec-
tric shock if your body is earthed or grounded.
3. Do not expose power tools to rain or wet con-
ditions. Water entering a power tool will increase
the risk of electric shock.
4. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges
or moving parts. Damaged or entangled cords
increase the risk of electric shock.
5. When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of
a cord suitable for outdoor use reduces the risk of
electric shock.
6. If operating a power tool in a damp location
is unavoidable, use a residual current device
(RCD) protected supply. Use of an RCD reduces
the risk of electric shock.
7. Power tools can produce electromagnetic
elds (EMF) that are not harmful to the user.
However, users of pacemakers and other similar
medical devices should contact the maker of their
device and/or doctor for advice before operating
this power tool.
Personal Safety
1. Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do not use a power tool while you are tired or
under the inuence of drugs, alcohol or med-
ication. A moment of inattention while operating
power tools may result in serious personal injury.
2. Use personal protective equipment. Always
wear eye protection. Protective equipment such
as a dust mask, non-skid safety shoes, hard hat or
hearing protection used for appropriate conditions
will reduce personal injuries.
3. Prevent unintentional starting. Ensure the
switch is in the off-position before connecting
to power source and/or battery pack, picking
up or carrying the tool. Carrying power tools with
your nger on the switch or energising power tools
that have the switch on invites accidents.
4. Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key left
attached to a rotating part of the power tool may
result in personal injury.
5. Do not overreach. Keep proper footing and
balance at all times. This enables better control
of the power tool in unexpected situations.
Termékspecifikációk
| Márka: | Makita |
| Kategória: | Csavaros gép |
| Modell: | TL065DZ |
Szüksége van segítségre?
Ha segítségre van szüksége Makita TL065DZ, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók Csavaros gép Makita
12 Október 2024
5 Október 2024
4 Október 2024
4 Október 2024
2 Október 2024
2 Október 2024
27 Szeptember 2024
24 Szeptember 2024
24 Szeptember 2024
21 Szeptember 2024
Útmutatók Csavaros gép
- Csavaros gép Milwaukee
- Csavaros gép Parkside
- Csavaros gép Worx
- Csavaros gép Bosch
- Csavaros gép Panasonic
- Csavaros gép AEG
- Csavaros gép Einhell
- Csavaros gép Ozito
- Csavaros gép Emos
- Csavaros gép Omega
- Csavaros gép Mafell
- Csavaros gép Genesis
- Csavaros gép Güde
- Csavaros gép Hitachi
- Csavaros gép Toolcraft
- Csavaros gép Hilti
- Csavaros gép Black & Decker
- Csavaros gép Kawasaki
- Csavaros gép Fieldmann
- Csavaros gép PowerPlus
- Csavaros gép Metabo
- Csavaros gép Powerfix
- Csavaros gép Biltema
- Csavaros gép BaseTech
- Csavaros gép Chamberlain
- Csavaros gép RYOBI
- Csavaros gép Beta
- Csavaros gép HiKOKI
- Csavaros gép Festool
- Csavaros gép Greenworks
- Csavaros gép Yato
- Csavaros gép Velleman
- Csavaros gép Trotec
- Csavaros gép Bavaria By Einhell
- Csavaros gép Porter-Cable
- Csavaros gép DeWalt
- Csavaros gép Wiha
- Csavaros gép Stanley
- Csavaros gép Silverline
- Csavaros gép Vonroc
- Csavaros gép Cotech
- Csavaros gép TAURUS Titanium
- Csavaros gép Alpha Tools
- Csavaros gép Fein
- Csavaros gép Cleco
- Csavaros gép Weidmüller
- Csavaros gép EasyMaxx
- Csavaros gép Cocraft
- Csavaros gép Craftsman
- Csavaros gép Laserliner
- Csavaros gép Hazet
- Csavaros gép Toolland
- Csavaros gép Ferm
- Csavaros gép Skil
- Csavaros gép Meec Tools
- Csavaros gép Dremel
- Csavaros gép Tacklife
- Csavaros gép Senco
- Csavaros gép Maktec
- Csavaros gép Steren
- Csavaros gép Power Craft
- Csavaros gép Kraftwerk
- Csavaros gép Matrix
- Csavaros gép Kress
- Csavaros gép Urrea
- Csavaros gép Truper
- Csavaros gép Bruder Mannesmann
- Csavaros gép Meister Craft
- Csavaros gép Batavia
- Csavaros gép Westfalia
- Csavaros gép Black Decker
- Csavaros gép Elu
- Csavaros gép Sthor
- Csavaros gép Pansam
- Csavaros gép Gedore
- Csavaros gép SW-Stahl
- Csavaros gép MSW
- Csavaros gép Einhell Bavaria
- Csavaros gép Wera
- Csavaros gép Rodcraft
- Csavaros gép Ingersoll Rand
- Csavaros gép Chicago Pneumatic
- Csavaros gép Total
- Csavaros gép Netter Vibration
Legújabb útmutatók Csavaros gép
13 Január 2025
12 Január 2025
12 Január 2025
11 Január 2025
5 Január 2025
5 Január 2025
31 December 2025
30 December 2025
30 December 2025
29 December 2024