Használati útmutató Microchip MCP41050
Oldalak 32 Engels nincs kategorizálva
Olvassa el ingyen online a(z) Microchip MCP41050 használati útmutatóját, vagy töltse le PDF-ben. Az útmutatót 7 ember találta hasznosnak. Kérdése van a modellről? Tegyen fel kérdést
2003 Microchip Technology Inc.DS11195C-page 1
MMCP41XXX/42XXX
Features
•256 taps for each potentiometer
•Potentiometer values for 10 kΩ, 50 kΩ and
100 kΩ
•Single and dual versions
•SPI™ serial interface (mode 0,0 and 1,1)
• ±1 LSB max INL & DNL
•Low power CMOS technology
•1 µA maximum supply current in static operation
•Multiple devices can be daisy-chained together
(MCP42XXX only)
•Shutdown feature open circuits of all resistors for
maximum power savings
•Hardware shutdown pin available on MCP42XXX
only
•Single supply operation (2.7V - 5.5V)
•Industrial temperature range: -40°C to +85°C
•Extended temperature range: -40°C to +125°C
Block Diagram
Description
The MCP41XXX and MCP42XXX devices are 256-
position, digital potentiometers available in 10kΩ,
50 kΩand 100 kΩ resistance versions. The
MCP41XXX is a single-channel device and is offered in
an 8-pin PDIP or SOIC package. The MCP42XXX con-
tains two independent channels in a 14-pin PDIP, SOIC
or TSSOP package. The wiper position of the
MCP41XXX/42XXX varies linearly and is controlled via
an industry-standard SPI interface. The devices con-
sume <1 µA during static operation. A software shut-
down feature is provided that disconnects the “A”
terminal from the resistor stack and simultaneously con-
nects the wiper to the “B” terminal. In addition, the dual
MCP42XXX has a SHDN pin that performs the same
function in hardware. During shutdown mode, the con-
tents of the wiper register can be changed and the
potentiometer returns from shutdown to the new value.
The wiper is reset to the mid-scale position (80h) upon
power-up. The RS (reset) pin implements a hardware
reset and also returns the wiper to mid-scale. The
MCP42XXX SPI interface includes both the SI and SO
pins, allowing daisy-chaining of multiple devices. Chan-
nel-to-channel resistance matching on the MCP42XXX
varies by less than 1%. These devices operate from a
single 2.7 - 5.5V supply and are specified over the
extended and industrial temperature ranges.
Package Types
16-Bit
Shift
VDD
VSS
SI
SCK
RS SHDN
PB1
PA1
PW1
Resistor
Array 1*
Wiper
Register
PB0
PW0
PA0
Resistor
Array 0
Wiper
Register
Register
S0
Control
Logic
CS
*Potentiometer P1 is only available on the dual
MCP42XXX version.
MCP42XXX
1
2
3
411
12
13
14
8
9
10
5
6
7
PDIP/SOIC/TSSOP
PB1
PA1
PW1
SHDN
SO
RS
PW0
PB0
CS
PA0
SCK
SI
VSS
VDD
MCP41XXX
1
2
3
45
6
7
8
PDIP/SOIC
PB0
PA0
VDD
PW0
VSS
CS
SCK
SI
Single/Dual Digital Potentiometer with SPI™ Interface
Termékspecifikációk
| Márka: | Microchip |
| Kategória: | nincs kategorizálva |
| Modell: | MCP41050 |
Szüksége van segítségre?
Ha segítségre van szüksége Microchip MCP41050, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók nincs kategorizálva Microchip
Microchip MCP6295 Útmutató Microchip ATSAME51N19A Útmutató Microchip CSAC-SA45S Útmutató Microchip ATSAMD21G18 Útmutató Microchip MD1711 Útmutató Microchip LX3302A Útmutató Microchip ATSAMDA1G15B Útmutató Microchip MCP6143 Útmutató