Használati útmutató Microchip MD1711

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Microchip MD1711 (20 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 9 ember találta hasznosnak és 5 felhasználó értékelte átlagosan 4.3 csillagra

Oldal 1/20
2019 Microchip Technology Inc. DS20005740A-page 1
MD1711
Features
Drives Two Ultrasound Transducer Channels
Generates a Five-Level Waveform
Drives 12 High-Voltage MOSFETs
±2A Source-and-Sink Peak Currents
Up to 20 MHz Output Frequency
12 V/ns Slew Rate
±3 ns Matched Delay Times
Less than –40 dB Second Harmonic
Two Separate Gate Drive Voltages
1.8V to 3.3V CMOS Logic Interface
Applications
Medical Ultrasound Imaging
Piezoelectric Transducer Drivers
Non-Destructive Testing (NDT)
Metal Flaw Detection
Sonar Transmitter
General Description
The MD1711 is a two-channel logic controller circuit
with low-impedance MOSFET gate drivers. It is
intended to be used with external FETs as a five-level
high-voltage and high-speed transmitter. The MD1711
is designed for medical ultrasound imaging
applications but can also be used for metal flaw
detection, NDT and for driving piezoelectric
transducers.
The MD1711 has two sets of control logic inputs, one
for Channel A and one for Channel B. Each channel
consists of three pairs of MOSFET gate drivers. These
drivers are designed to match the drive requirements of
the TC6320. One MD1711 drives six TC6320s. Each
driver consists of an N-channel and a P-channel
MOSFET. They are designed to have the same
impedance and can provide peak currents of 2 amps.
Package Types
48-lead LQFP
(Top view)
See Table 2-1 for pin information.
48-lead QFN
(Top view)
1
48
1
48
High-Speed Integrated Ultrasound Driver IC

Termékspecifikációk

Márka: Microchip
Kategória: nincs kategorizálva
Modell: MD1711

Szüksége van segítségre?

Ha segítségre van szüksége Microchip MD1711, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek