Használati útmutató Middle Atlantic 5-RS18

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Middle Atlantic 5-RS18 (2 oldal) a Wandsteun kategóriában. Ezt az útmutatót 21 ember találta hasznosnak és 11 felhasználó értékelte átlagosan 4.3 csillagra

Oldal 1/2
5-RS Series
5-RS Runner Kits
Instruction Sheet
PART QTY
Pair of Runners 2
Phillips Head Screws 6
1/4-20 Flange Nuts 6
1) Install the runners using the two outer holes.
2) Drill into the center holes using a 9/32" drill bit.
3) Install the remaining nuts and bolts.
1) Install the runners to the enclosure bottom through the holes
shown using the supplied hardware. (FIGURE A)
2) Install the screws and nuts as shown. (FIGURE B)
NOTE: If your Slim 5 does not have the center holes, perform the
following steps:
SLIM 5 SERIES INSTALLATION
SLIM 5 SERIES
RUNNER KITS
5-RS20
5-RS26
FIGURE A
DTRK SERIES
RUNNER KIT
5-RS18
SLIM 5 BOTTOM SHOWN
FIGURE B
CFR/HRF SERIES
RUNNER KITS
5-RS14 (HRF Only)
5-RS16
5-RS18
5-RS20
5-RS23
I-00273 Rev E

Termékspecifikációk

Márka: Middle Atlantic
Kategória: Wandsteun
Modell: 5-RS18

Szüksége van segítségre?

Ha segítségre van szüksége Middle Atlantic 5-RS18, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek