Használati útmutató Moxa AWK-3131-EU
Moxa
wifi ismétlő
AWK-3131-EU
Olvassa el alább 📖 a magyar nyelvű használati útmutatót Moxa AWK-3131-EU (16 oldal) a wifi ismétlő kategóriában. Ezt az útmutatót 7 ember találta hasznosnak és 4 felhasználó értékelte átlagosan 4.3 csillagra
Oldal 1/16
11 . A20 Moxa Inc ll rights reserved.
P/N: 1802031310010
AWK- 3131
Hardware Installation Guide
Moxa AirWorks
First Edition, February 2011
- - 2
Overview
Moxa's new AWK- -3131 3 in-1 industrial wireless AP/bridge/client meets
the growing need for faster data transmission speeds and wider coverage
by supporting IEEE 802.11n technology with a net data rate of up to 300
Mbps. The AWK-3131 combines two adjacent 20 MHz channels into a
single 40 MHz channel to deliver a potent combination of greater
reliability and more bandwidth. The two redundant DC power inputs
increase the reliability of the power supply, and the AWK-3131 can be
powered via PoE to make deployment easier. The AWK-3131 can operate
on either the 2.4 or 5 GHz bands and is backward-compatible with
existing 802.11a/b/g deployments to future-proof your wireless
investments.
Package Checklist
M -313oxa’s AWK 1 is shipped with the following items. If any of these
items is missing or damaged, please contact your customer service
representative for assistance.
• AWK- 3131
• 2 dual- - - band omni directional antennas (2dBi, RP SMA, 2.4/5 GHz)
• Cable holder with one screw
• 3 protective caps
• DIN- rail kit
• Documentation and software CD
• Quick installation guide (printed)
• Warranty card
Recommended SFP Accessories
SFP- 1G series
• SFP- 1GSXLC:
Small form factor pluggable transceiver with 1000BaseSX, LC, 0.5 km,
0 to 60°C
• SFP- - 1GSXLC T:
Small form factor pluggable transceiver with 1000BaseSX, LC, 0.5 km,
- 20 to 75°C
• SFP- 1GLSXLC:
Small form factor pluggable transceiver with 1000BaseLSX, LC, 2 km,
0 to 60°C
• SFP- - 1GLSXLC T:
Small form factor pluggable transceiver with 1000BaseLSX, LC, 2 km,
- 40 to 85°C
• SFP- 1GLXLC:
Small form factor pluggable transceiver with 1000BaseLX, LC, 10 km,
0 to 60°C
• SFP- - 1GLXLC T:
Small form factor pluggable transceiver with 1000BaseLX, LC, 10 km,
- 40 to 85°C
• SFP- 1GLHLC:
Small form factor pluggable transceiver with 1000BaseLH, LC, 30 km,
0 to 60°C
• SFP- - 1GLHLC T:
Small form factor pluggable transceiver with 1000BaseLH, LC, 30 km,
- 40 to 85°C
- - 3
• SFP- 1GLHXLC:
Small form factor pluggable transceiver with 1000BaseLHX, LC, 40
km, 0 to 60°C
• SFP- - 1GLHXLC T:
Small form factor pluggable transceiver with 1000BaseLHX, LC, 40
km, -40 to 85°C
• SFP- 1GZXLC:
Small form factor pluggable transceiver with 1000BaseZX, LC, 80 km,
0 to 60°C
• SFP- - 1GZXLC T:
Small form factor pluggable transceiver with 1000BaseZX, LC, 80 km,
- 40 to 85°C
• SFP- 1GEZXLC:
Small form factor pluggable transceiver with 1000BaseEZX, LC, 110
km, 0 to 60°C
• SFP- - 1GEZXLC 120:
Small form factor pluggable transceiver with 1000BaseEZX, LC, 120
km, 0 to 60°C
Installation and Configuration
Before installing the AWK- 331 1, make sure that all items in the Package
Checklist are in the box. In addition, you will need access to a notebook
computer or PC equipped with an Ethernet port. The AWK- 331 1 has a
default IP address that you must use when connecting to the device for
the first time.
Step 1: Select the power source
The AWK- 331 1 can be powered by a DC power input or PoE (Power over
Ethernet). The AWK- 3 31 1 will use whichever power source you choose.
Step 2: Connect the AWK 1 to a notebook or PC- 331
Since - 3 - -the AWK 31 1 supports MDI/MDI X auto sensing, you can use
either a straight-through cable or crossover cable to connect the
AWK- 331 1 to a computer. If the LAN LED indicator on the AWK- 331 1 port
lights up, it means the connection is established.
Step 3: Set up the computer’s IP address
Set an IP address on the same subnet as the AWK 1. Since - 331 the
AWK- 331 1’s default IP address is 192.168.127.253, and the subnet mask
is 255.255.255.0, you should set the IP address of the computer to
192.168.127.xxx 55.255.255.0 and subnet mask to 2 .
Step 4: Use the web-based manager to configure
AWK- 31 31
Open your computer’s web browser and then type
http://192.168.127.253 in the address field to access the homepage
of the web-based management. Before the homepage opens, you will
need to enter the user name and password. For first-time configuration,
enter the default user name and password and then click on the Login
button:
User name: admin
Password: root
Termékspecifikációk
| Márka: | Moxa |
| Kategória: | wifi ismétlő |
| Modell: | AWK-3131-EU |
Szüksége van segítségre?
Ha segítségre van szüksége Moxa AWK-3131-EU, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók wifi ismétlő Moxa
21 Augusztus 2024
21 Augusztus 2024
21 Augusztus 2024
21 Augusztus 2024
21 Augusztus 2024
21 Augusztus 2024
21 Augusztus 2024
21 Augusztus 2024
21 Augusztus 2024
21 Augusztus 2024
Útmutatók wifi ismétlő
- wifi ismétlő EnGenius
- wifi ismétlő ALC
- wifi ismétlő Verint
- wifi ismétlő Deltaco
- wifi ismétlő Smart-AVI
- wifi ismétlő Optex
- wifi ismétlő Digitus
- wifi ismétlő Maxxter
- wifi ismétlő Cisco
- wifi ismétlő Linksys
- wifi ismétlő Xiaomi
- wifi ismétlő Comtrend
- wifi ismétlő Eero
- wifi ismétlő LevelOne
- wifi ismétlő DSC
Legújabb útmutatók wifi ismétlő
30 Március 2025
30 Március 2025
25 Március 2025
13 Január 2025
12 Január 2025
6 Január 2025
4 Január 2025
3 Január 2025
31 December 2025
31 December 2025