Használati útmutató Nelson R2000WF
                    Nelson
                    
                    öntözésvezérlő
                    
                    R2000WF
                
                                
                
                
                                
                Olvassa el alább 📖 a magyar nyelvű használati útmutatót Nelson R2000WF (2 oldal) a öntözésvezérlő kategóriában. Ezt az útmutatót 11 ember találta hasznosnak és 6 felhasználó értékelte átlagosan 4.5 csillagra
                        Oldal 1/2
                    
                    
                    
ROTATOR® FAMILY OF SPRINKLERS  
Tel: +1 509.525.7660  /  Fax: +1 509.525.7907  /   /  info@nelsonirrigation.comnelsonirrigation.com   
R2000WF/LP  
DISASSEMBLY/REPAIR INSTRUCTIONS
R2000WF Repair 2/2020
Cap Removal Tool
GENERAL DISASSEMBLY
1.   from the ACME thread of REMOVE THE SPRINKLER
the quick change adapter. 
2.   SEPARATE THE CAP FROM THE BODY by squeezing 
the release points (the words SQUEEZE) while 
turning counter-clockwise. For easy removal, use 
the #10689 Cap Removal Tool. Position the tool (as 
shown on the right) to apply pressure to the words 
SQUEEZE.
3.   Use the #12260 2TN Nozzle Removal Tool to 
REMOVE THE 2TN NOZZLE from the body. Place 
the tool at the top of the R2000WF body and press 
down. The nozzle should easily pop out. 
 WARNING: Always use the #12260 tool to remove a 2TN nozzle from a 
R2000WF Rotator. Never use a stick, rod, or any other object to push on 
the outlet of the 2TN nozzle to remove. This can easily damage the plate 
bearing surface and cause rotation failure. 
4.   REMOVE THE PLATE by placing your fingers in the 
open space in the cap (between the washer and 
plate). Pull towards you until the plate pops up 
away from the cap.
5.   REMOVE THE MOTOR from the cap by fitting the 
Motor Removal Tool #12215 onto the top of the cap. 
  Press on the outer ring of the motor removal (1) 
tool so it fits tightly against the cap.  Press on (2) 
the inner circle of the tool so the motor disengages 
from the cap. Gently push the motor from the top to 
completely remove it from the cap assembly. 
Nozzle
oval 
Motor Removal Tool
40 and 65 PSI (2.8 to 4.5 BAR)
•   Proper assembly is essential to 
product satisfaction.
Plate
Body
2TN Nozzle
Quick Change
Adapter
Motor
Cap
Diffuser
Washer
Cap Assembly
1 1
2
Termékspecifikációk
| Márka: | Nelson | 
| Kategória: | öntözésvezérlő | 
| Modell: | R2000WF | 
Szüksége van segítségre?
Ha segítségre van szüksége Nelson R2000WF, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók öntözésvezérlő Nelson
                        
                         21 Június 2024
                        
                    
                                                            
                        
                         21 Június 2024
                        
                    
                                                            
                        
                         21 Június 2024
                        
                    
                                                            
                        
                         21 Június 2024
                        
                    
                                                            
                        
                         21 Június 2024
                        
                    
                                                            
                        
                         21 Június 2024
                        
                    
                                                            
                        
                         21 Június 2024
                        
                    
                                                            
                        
                         21 Június 2024
                        
                    
                                                            
                        
                         21 Június 2024
                        
                    
                                                            
                        
                         21 Június 2024
                        
                    
                                                            Útmutatók öntözésvezérlő
- öntözésvezérlő Kärcher
 - öntözésvezérlő Hunter
 - öntözésvezérlő Toolcraft
 - öntözésvezérlő Gardena
 - öntözésvezérlő Cotech
 - öntözésvezérlő Claber
 
Legújabb útmutatók öntözésvezérlő
                        
                         28 Május 2024
                        
                    
                                                            
                        
                         28 Május 2024
                        
                    
                                                            
                        
                         16 Május 2024
                        
                    
                                                            
                        
                         12 Május 2024
                        
                    
                                                            
                        
                         9 Május 2024
                        
                    
                                                            
                        
                         8 Május 2024
                        
                    
                                                            
                        
                         5 Május 2024