Használati útmutató NUVO Decker 60/4644

NUVO Megkönnyebbülés Decker 60/4644

Olvassa el alább 📖 a magyar nyelvű használati útmutatót NUVO Decker 60/4644 (2 oldal) a Megkönnyebbülés kategóriában. Ezt az útmutatót 10 ember találta hasznosnak és 5.5 felhasználó értékelte átlagosan 4.3 csillagra

Oldal 1/2
ASSEMBLY INSTRUCTION
SKU#60/4544, 4 60/464
NOTE: Please consult a qualied electrician if you are not certain of the installation or service.
CAUTION: Before starting the installation or service, disconnect the power by turning o the circuit
breaker or by removing the fuse at the fuse box.
1. Carefully unpack the xture, lay out all parts on a clean surface.
2. Fasten the mounting ring onto the outlet box by using provided 2 outlet box screws.
3. Tie ground wire from outlet box and from xture to the ground screw on the mounting ring. Connect white
wire (live wire) from supply circuit. Cover connections using provided wire connectors.
4. Place the xture body to the wall by aligning the protruding mounting screws all the way through the wall
plate and tighten lock nuts to the mounting screws until the xture body is held rmly against the wall.
5. Unscrew the socket rings and socket covers from the sockets. Place the shade A and shade B and socket
covers over the sockets, refasten the socket rings to secure them.
6. Install the bulbs ot included). (N
7. Turn on the power. This xture can be installed as an up-light or down-light position. a
A Satco Product

Termékspecifikációk

Márka: NUVO
Kategória: Megkönnyebbülés
Modell: Decker 60/4644

Szüksége van segítségre?

Ha segítségre van szüksége NUVO Decker 60/4644, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek