Használati útmutató PAC RP4-CH11

Olvassa el alább 📖 a magyar nyelvű használati útmutatót PAC RP4-CH11 (4 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 19 ember találta hasznosnak és 6 felhasználó értékelte átlagosan 4.6 csillagra

Pacic Accessory Corporation

® | Santa Ana, California 92705 | Ph. 866-931-8021 | support@pac-audio.com

©2011 Pacic Accessory Corporation

www.pac-audio.com

C

RP4-CH11

Radio Replacement & Steering Wheel Control Interface

for Chrysler/Dodge/Jeep Vehicles

Rev. 112811

Introduction & Features

Important Notes

Wiring Connection Chart

Illustration / Schematic

The RP4-CH11 interface allows the replacement of a factory radio in select Chrysler/Dodge/Jeep vehicles with MSCAN or

LSFT-CAN databus radios. Using this interface will retain factory features such as steering wheel controls (SWC) vehicle

entertainment system (VES) and the factory audio amplier whenever the original radio is removed. The RP4-CH11 also

provides data bus driven outputs such as retained accessory power (RAP), vehicle speed sensor (VSS), illumination,

reverse trigger and parking brake.

1. The radio select rotary switch on the side of the interface must be adjusted to the proper radio setting before plugging the

interface into the vehicle (see next page for setting chart).

2. When the interface is rst plugged into the vehicle the LED will ash indicating the auto detect sequence. Once the CAN-BUS

speed is detected the LED will illuminate and should be on at all times when the interface is on. The LED will also ash whenever

a SWC button is pressed

3. The interface comes pre-programmed for all of the vehicles factory SWC functions and does not require programming unless

you wish to re-assign the SWC functions to different buttons. The SWC can always be restored to default settings by pressing

and releasing the program button on the side of the interface once and waiting 7 seconds for the LED to ash 4 times.

Red / WhiteP.B. Output (-)

Purple / WhiteVSS Output

Blue / WhiteAmp Turn On Input

RedAcc. Output (1 amp)

Orange / WhiteIllum. Output (+)

GreenReverse Output (+)

Interface Connector

YellowBattery +12v

Black Ground

BlueAntenna On Input

WhiteFront L + input

White / BlackFront L - input

GreyFront R + input

Grey / BlackFront R - input

GreenRear L + input

Green / BlackRear L - input

PurpleRear R + input

Purple / BlackRear R - input

Vehicle ConnectorSWC Connector

Blu/YelKenwwod, Newer

JVC, OEM or

Blaupunkt

3.5mm JackAlpine, JVC,

Clarion, Pioneer,

Sony, Valor, Boyo,

Dual, Visteon or

Advent

Accessory Output

+12volts 1amp max.

Interface Connector

See above chart for

wire color descriptions.

Vehicle Connector

See above chart for

wire color description.

SWC Connection

See above chart for

different radio type

connections

WiringSWC Connection

Page 1

Termékspecifikációk