Használati útmutató PAC RP4-NI13

Olvassa el alább 📖 a magyar nyelvű használati útmutatót PAC RP4-NI13 (3 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 11 ember találta hasznosnak és 4 felhasználó értékelte átlagosan 4.5 csillagra

Radio Replacement and Steering Wheel Control

Interface for Select Nissan Vehicles

RP4-NI13

© 2022 AAMP Global. All rights reserved. PAC is a Power Brand of AAMP Global.

PAC-audio.com

C

Page 1

Rev: 1

Date: 9/14/2022

Introduction and Features

Important Notes

Wiring Connection Chart

Illustration / Schematic

1. These instructions apply to R.1.5.1.4 or later revisions. The revision info can be found on a small white sticker on the interface

and packaging.

2. The radio select rotary switch on the side of the interface, must be adjusted to the proper radio setting before plugging the

interface into the vehicle (see next page for setting chart).

3. The interface comes pre-programmed for all of the vehicle’s factory SWC functions, and does not require programming unless

you wish to re-assign the SWC functions, or utilize short press, long press dual command functionality. The SWC can always

be restored to default settings by pressing and releasing the program button on the side of the interface once, and waiting 7

seconds for the LED to ash 4 times.

4. Does not retain 360 camera system.

SWC Connection

See above chart for

different radio type

connections

Acc On/

Programming

LED

Programming

Button

Wiring

SWC Connection

The RP4-NI13 interface allows the replacement of a factory radio in select Nissan vehicles with MSCAN databus radios.

Using this interface will retain factory features, such as steering wheel controls (SWC), reverse camera, and the factory

amplier, when the original radio is removed. Use of this interface also allows you to program two radio functions to

each SWC button by using short press, long press dual command functionality. The RP4-NI13 also provides outputs

such as vehicle speed sensor (VSS), illumination and *reverse trigger.

Vehicle Connector

SWC Connector

YellowBattery +12v

BlackGround

RedAccessory 12v+

(10 amp)

PinkVehicle Speed

Output

Blue / WhiteAmp Turn On Input

Orange / WhiteIllumination Output

(+)

Purple / White*Reverse Output (+)

WhiteFront L + input

White / BlackFront L - input

GrayFront R + input

Gray / BlackFront R - input

GreenRear L + input

Green / BlackRear L - input

PurpleRear R + input

Purple / BlackRear R - input

Yellow RCA*Reverse Camera

Output

Blu/YelKenwood, Newer

JVC

3.5mm JackAlpine, JVC,

Clarion, Fusion,

Pioneer, Sony,

Boyo, Dual,

Lightning Audio,

Visteon or Advent

* Only available in vehicles equipped with a factory reverse camera.

Cut for Non-Bose systems

Aftermarket Radio Connections

See above chart for wire color

description.

Termékspecifikációk