Használati útmutató Proaim CG219
Proaim
nincs kategorizálva
CG219
Olvassa el alább 📖 a magyar nyelvű használati útmutatót Proaim CG219 (5 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 9 ember találta hasznosnak és 5 felhasználó értékelte átlagosan 4.1 csillagra
Oldal 1/5

What s In The Box’
Please inspect the contents of your shipped package to ensure you have received everything that is listed
below.
SnapRig Universal DSLR Camera Cage (CG219)
A s s e m b l y M a n u a l
Camera Cage with slide bars
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the Publisher.
3 x Allen Keys Sizes:
(3/16mm,4mm & 3mm)
Top Handle
Wooden Side Handle
Top Plate Camera Plate
2 x Slide Bars

2
DSLM Camera Cage Setup
• Remove both the Allen bolts of the camera
plate with the help of a 3/16mm Allen key and
aach it to the boom part of the camera
cage.
Top Handle
• Then Align the top plate with the camera cage
and secure it properly with the help of a
3/16mm Allen Key by inserng both the Allen
bolts on the top plate.
• Place the top handle above the top plate.
NOTE: The provided mulple threads of the top
plate allow you to mount the top handle
anywhere according to your requirement.
• Aer placing the top handle on the top plate,
match the bolt with the side threads of the
handle, insert the buon head, and ght it
with the help of a 4mm Allen key.
• Remove both the Allen bolts on the top plate
with a 3/16mm Allen key.
• Then secure it with the help of a 3/16mm
allen key.
NOTE: You can adjust both the top and base
plates to your requirements by loosening the
bolt and sliding it in.

3
• The wooden side handle is now properly ght.
Interchange Slide Bars
• Then remove the buon head from both sides
of the camera cage with the help of a 4mm
Allen key.
• Match the provided screw hole on the boom
of the camera plate with the camera
hole and screw it ghtly with(Not Included)
the help of a screwdriver.
Side Handle
• Match the wooden side handle with the side
thread of the camera cage and insert the side
handle and ghten it properly with its knob.
NOTE: You can hold the handle anywhere on the
provided mulple threads of the Camera Cage
according to your requirement.
• Loosen the knob of the wooden side handle
and remove the handle.
• Aach the Camera (Not Included) into the
Camera cage properly by sliding it onto the
shoe mount on the top plate.
Termékspecifikációk
Márka: | Proaim |
Kategória: | nincs kategorizálva |
Modell: | CG219 |
Szüksége van segítségre?
Ha segítségre van szüksége Proaim CG219, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók nincs kategorizálva Proaim
2 Április 2025
2 Április 2025
2 Április 2025
2 Április 2025
2 Április 2025
28 December 2024
28 December 2024
28 December 2024
28 December 2024
28 December 2024
Útmutatók nincs kategorizálva
- nincs kategorizálva Revamp
- nincs kategorizálva Remington
- nincs kategorizálva JBL
- nincs kategorizálva Arçelik
- nincs kategorizálva Caple
- nincs kategorizálva Hawk-Woods
- nincs kategorizálva Dave Smith
- nincs kategorizálva Casalux
- nincs kategorizálva Elro
- nincs kategorizálva Gardena
- nincs kategorizálva Scarlett
- nincs kategorizálva GP
- nincs kategorizálva Tenda
- nincs kategorizálva Liebherr
- nincs kategorizálva Neo
Legújabb útmutatók nincs kategorizálva
10 Április 2025
10 Április 2025
10 Április 2025
9 Április 2025
9 Április 2025
9 Április 2025
9 Április 2025
9 Április 2025
9 Április 2025
9 Április 2025