Használati útmutató Proclip 216417

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Proclip 216417 (2 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 17 ember találta hasznosnak és 9 felhasználó értékelte átlagosan 4.0 csillagra

Item No. 216417 - ModTek Key Lock Module

View Color

Instructions

Compatible with:

For the USB-C 3.1 Dock

(With or Without Hub)

Important:

Self-installation instructions and advice are provided for your

convenience. It is your responsibility to determine if you have the

knowledge, skills, and physical ability required to properly perform an

installation. ProClip USA, Inc. shall have no liability for damage or

injury resulting from the installation or use of any ProClip or third

party products. It is your responsibility to ensure that all products are

installed in adherence with local laws and regulations and in such a

manner as to allow a vehicle to be operated safely and without

distraction. ProClip USA, Inc. product warranties do not cover the

installation, removal or reinstallation of any product.

Attention: Carefully read all instructions and review the images before installing this product.

1. Remove Left Mount Point:

Using the included tool, remove the 4 fasteners that secure the left mount point

to the dock.

3. Re-Install Left Mount Point:

Using the included tool, replace the left mount point and tighten the screws to

finger tight. (0.6 N*m or 5.3 inch-pounds).

2. Install Key Lock Module:

Using the fasteners included, install the lock module by securing it to the back of the

dock through the 2 pre-drilled holes and the included Allen Key.

4. Using the Lock:

The key lock is designed to slot into the back of a ModTek Hard Case and can be

used with any compatible Hard Case.

Termékspecifikációk