Használati útmutató Proclip 216418

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Proclip 216418 (2 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 13 ember találta hasznosnak és 7 felhasználó értékelte átlagosan 5.0 csillagra

Oldal 1/2
Item No. 216418 - ModTek USB-C 3.1 PD Hub
Module
View Color
Instructions
Compatible with:
3 x USB-A (1 x USB 3.0, 2 x USB 2.0)
1x USB-C PD 100W Port
USB-C to USB-C Hard Adapter
No Power Supply
Important:
Self-installation instructions and advice are provided for your
convenience. It is your responsibility to determine if you have the
knowledge, skills, and physical ability required to properly perform an
installation. ProClip USA, Inc. shall have no liability for damage or
injury resulting from the installation or use of any ProClip or third
party products. It is your responsibility to ensure that all products are
installed in adherence with local laws and regulations and in such a
manner as to allow a vehicle to be operated safely and without
distraction. ProClip USA, Inc. product warranties do not cover the
installation, removal or reinstallation of any product.
Attention: Carefully read all instructions and review the images before installing this product.
1. Included USB-C Adapter:
The included USB-C male to male adapter included is used to connect the hub
directly to the back of the USB-C 3.1 dock. It needs to be installed before the
hub.
3. Install the Hub:
Slide the hub and cover onto back of the dock ensuring the USB-C adapter
engages into the hub and secures it.
2. Hub and Cover:
Before installing the hub, it needs to be inserted into the cover. Ensure the hub ports
align with the cable retention slots as shown above.
4. Secure the Hub:
Using the included fasteners and tool, secure the hub cover to the dock.

Termékspecifikációk

Márka: Proclip
Kategória: nincs kategorizálva
Modell: 216418

Szüksége van segítségre?

Ha segítségre van szüksége Proclip 216418, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek