Használati útmutató Proteus BC-81090

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Proteus BC-81090 (4 oldal) a Szobakerékpár kategóriában. Ezt az útmutatót 21 ember találta hasznosnak és 4 felhasználó értékelte átlagosan 4.1 csillagra

PROGRAMMABLE MAGNETIC EXERBIKE

MONITOR BC-81090 WITH LCD DISPLAY

SUMMARY:

This system is designed for programmable magnetic bike. There are 3 parts to this system the monitor

(BC-81090), motor & controller and magnetic braking system.

A.Power up :

1.Before all, you should connect the connection cables with monitor together.

2.The power supplier to the monitor is 6V/500mA. Please make sure the output of the adaptor is

correct.

3.After power up, all LCD segments will light up for 2 seconds & CPU will be reset the resistance

into level 1. And then the system goes to the clock and date setting mode. After finished the clock

and date setting or without setting any value after 20 seconds, the monitor will goes into the

initial mode. The displays will be shown as fig. 2.

**REMARK:

DO NOT CONNECT ANY ( AC, DC ) POWER SUPPLY

BEFORE COMPLETELY ASSEMBLED

1.If the connection cables were installed incorrectly, monitor will display “E1” on matrix display

and generate a beep sound. To release the beep sound, please press “ START / PAUSE (Hold to

reset) “ button or take off the adaptor. Before asking service, please examine if all connection

cables are well connected, and without broken.

2.Using a period of time, if the power source can’t drive the motor and controller smoothly, the

monitor will display a sign of “E1”. Unplug the adaptor and wait for 15 seconds, and then reinstall

the plug of adaptor. If the monitor still shows “E1” and beeps, please call service man.

3.If the monitor shows “ E2 ”message, please call service man.

Termékspecifikációk