Használati útmutató QSC SB-7118

QSC mélynyomó SB-7118

Olvassa el alább 📖 a magyar nyelvű használati útmutatót QSC SB-7118 (7 oldal) a mélynyomó kategóriában. Ezt az útmutatót 9 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/7
*TD-000150-00*
Cinema Loudspeaker Systems User Manual
SB-5118 and SB-7118 SINGLE-18” Subwoofers
Introduction
The SB-5118 and SB-7118 are specially designed cinema subwoofers, featuring 500 and 700
watt, respectively, 18” (460mm) low-frequency transducers mounted in ported enclosures. The
enclosures are tuned to 25 hertz and use a B6 alignment. These should be used with the B6
boost filter option provided by the QSC SF-1 or SF-3 Subwoofer Filter modules or the QSC Dig-
ital Cinema Monitor to ensure extended response to the lowest audible frequencies.
Meeting cinema requirements for the extended low frequency response differentiates the SB-
5118 and SB-7118 from more conventional “rock-and-roll” subwoofer systems. Their fre-
quency range extends to below 25 hertz when used with the correct B6 filter.
The two custom 500 watt (700 watt, SB-7118), 18” transducers were developed especially for
cinema use. The woofers feature 4” (100mm) voice coils and vented pole pieces to ensure cool
operation, even at high power levels. Cooler temperatures increase driver lifespan and
decrease problematic power compression at high drive levels. Undercut pole pieces provides a
Symmetrical Magnetic Gap (SMG), reducing second harmonic distortion.
Enclosures are constructed of high quality MDF panels.
Large, Fully Radiused Ports (FRP) ensure smooth air flow through the ports, especially at higher
drive levels. This prevents potentially audible port turbulence noise. Both internal and external
port openings are fully radiused.
With Symmetrical Port Loading (SPL) bass ports are evenly spaced on each side of the trans-
ducers, making internal pressure more uniform across the back surface of the transducer. This
prevents the cone from being displaced to one side or another by unbalanced air pressure,
reducing the chance of driving the voice coil out of the center of the gap at high drive levels.
Enclosure is not designed to be suspended, flown, or rigged. Do not suspend,
fly, or rig this enclosure.
This product is capable of producing sound pressure levels that can perma-
nently damage human hearing. Always keep sound pressure levels in the lis-
tening area below levels that can damage human hearing.
Install in accordance with QSC Audio Product’s instructions and a licensed,
professional engineer. Only use attachments, mounts, accessories, or brack-
ets specified by QSC Audio Products, Inc. Refer all servicing to qualified per-
sonnel. Servicing is required when the apparatus has been damaged in any
way.
WARNING! Before placing, installing, rigging, or suspending any speaker
product, inspect all hardware, suspension, cabinets, transducers, brackets
and associated equipment for damage. Any missing, corroded, deformed or
non-load rated component could significantly reduce the strength of the
installation, placement, or array. Any such condition severely reduces the
safety of the installation and should be immediately corrected. Use only
hardware which is rated for the loading conditions of the installation and any
possible short-term unexpected overloading. Never exceed the rating of the
hardware or equipment. Consult a licensed, professional engineer when any
doubt or questions arise regarding a physical equipment installation.
TD-000269-00 rev.A
© Copyright 2007, QSC Audio Products, Inc.
QSC® is a registered trademark of QSC Audio Products, Inc.
“QSC” and the QSC logo are registered with the U.S. Patent and Trademark Office
1675 MacArthur Blvd., Costa Mesa, CA, 92626 USA
Main Number (714) 754-6175 Sales & Marketing (714) 957-7100 or toll free (USA only) (800) 854-4079
Customer Service(714) 957-7150 or toll free (USA only) (800) 772-2834
Connections
Normal Connection
The SB-5118/7118 has barrier strip screw termi-
nals for connection. The terminals accept up to
#10 AWG (5.3mm2) stranded loudspeaker wiring.
Use the largest wire size and shortest wire
length possible for a given installation. Observe
the polarity markings and keep polarity consis-
tent throughout the system for best performance.
Parallel Connection of Second SB-5118/7118
The terminals marked OUTPUT may be used to
connect another SB-5118/7118 in parallel. Con-
nect the wires as shown in the illustration, at
right.
Normal Connection Example:
Amplifier capable of
driving 4 ohm loads
Amplifier capable of
driving 2 ohm loads
Parallel Connection Example:

Termékspecifikációk

Márka: QSC
Kategória: mélynyomó
Modell: SB-7118

Szüksége van segítségre?

Ha segítségre van szüksége QSC SB-7118, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók mélynyomó QSC

QSC

QSC KS112 Útmutató

4 Augusztus 2024
QSC

QSC LS118 Útmutató

2 Augusztus 2024
QSC

QSC SB-118F Útmutató

31 Július 2024
QSC

QSC KS118 Útmutató

29 Július 2024
QSC

QSC SB-2180 Útmutató

26 Július 2024
QSC

QSC SB-218F Útmutató

23 Július 2024
QSC

QSC WL118-sw Útmutató

23 Július 2024
QSC

QSC AcousticDesign AD-C81Tw Útmutató

22 Július 2024
QSC

QSC E218sw Útmutató

20 Július 2024
QSC

QSC SB-7218 Útmutató

16 Július 2024

Útmutatók mélynyomó

Legújabb útmutatók mélynyomó

Phase Technology

Phase Technology IW200-II Útmutató

4 Április 2025
Wet Sounds

Wet Sounds ZERO 10 S4 XZ-W Útmutató

2 Április 2025
SoundTube

SoundTube CM1001D Útmutató

2 Április 2025
JL Audio

JL Audio FS108-W5 Útmutató

31 Március 2025
Phase Technology

Phase Technology PL-12p Útmutató

30 Március 2025
ETON

ETON Graphit 8-2 Útmutató

19 Március 2025
ETON

ETON Graphit 8-4 Útmutató

19 Március 2025
ETON

ETON Graphit 10-4 Útmutató

19 Március 2025
ETON

ETON MW 10 FLAT Útmutató

19 Március 2025
ETON

ETON PW 8 Útmutató

19 Március 2025