Használati útmutató QSC WL118-sw

QSC mélynyomó WL118-sw

Olvassa el alább 📖 a magyar nyelvű használati útmutatót QSC WL118-sw (20 oldal) a mélynyomó kategóriában. Ezt az útmutatót 4 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/20
User Manual
WL2082-i – Full-range line array loudspeaker
WL118-sw – Subwoofer line array loudspeaker
FB2082-i – Array frame
EB2082-i – Extension bar
PB2082-i – Pull-back bar
GS115-sw – Ground stack kit
*TD-000218-00*
TD-000218-00-E
ILA System v2
1
IMPORTANT SAFETY PRECAUTIONS AND EXPLANATION OF SYMBOLS
Install in accordance with instructions by QSC Audio Products, LLC instructions and under the supervision of a licensed Professional Engineer.
WARNING!
Before placing, installing, rigging, or suspending any speaker product, inspect all hardware, suspension, cabinets, transducers, brackets and associated
equipment for damage. Any missing, corroded, deformed, or non-load rated component could significantly reduce the strength of the installation,
placement or array. Any such condition severely reduces the safety of the installation and should be immediately corrected. Use only hardware
which is rated for the loading conditions of the installation and any possible short-term, unexpected overloading. Never exceed the rating of the
hardware or equipment.
Consult a licensed, Professional Engineer regarding physical equipment installation. Ensure that all local, state and national regulations regarding the
safety and operation of suspended equipment are understood and adhered to.
Warranty (USA only; other countries, see your dealer or distributor)
Disclaimer
QSC Audio Products, LLC is not liable for any damage to amplifiers or any other equipment that is caused by negligence or improper installation and/
or use of this loudspeaker product.
QSC Audio Products 3-Year Limited Warranty
QSC Audio Products, LLC (”QSC”) guarantees its products to be free from defective material and/or workmanship and will replace defective parts and
repair malfunctioning products under this warranty when the defect occurs under normal installation and use-provided the unit is returned to our factory,
one of our authorized service stations or an authorized QSC International Distributor via pre-paid transportation with a copy of proof of purchase (i.e.,
sales receipt). This warranty provides that the examination of the return product must indicate, in our judgment, a manufacturing defect. This warranty
does not extend to any product which has been subjected to misuse, neglect, accident, improper installation, or where the date code has been removed
or defaced. QSC shall not be liable for incidental and/or consequential damages. This warranty gives you specific legal rights. This limited warranty is
freely transferable during the term of the warranty period. The warranty on QSC products is NOT VALID if the products have been purchased from an
unauthorized dealer/online e-tailer, or if the original factory serial number has been removed, defaced, or replaced in any way. Damage to, or loss of any
software or data residing on the product is not covered. When providing repair or replacement service, QSC will use reasonable efforts to reinstall the
product’s original software configuration and subsequent update releases, but will not provide any recovery or transfer of software or data contained on
the serviced unit not originally included in the product.
Customers may have additional rights, which vary from state to state or from country to country. In the event that a provision of this limited warranty is
void, prohibited or superseded by local laws, the remaining provisions shall remain in effect.
Periodically, this warranty is updated. To obtain the most recent version of QSC’s warranty statement, please visit www.qscaudio.com.
Contact us at 800-854-4079 or visit our website at www.qscaudio.com.
The QSC limited warranty is valid for a period of three (3) years from date of purchase in the United States and many (but not all)
other countries.
For QSC warranty information in countries other than the United States, contact your authorized QSC international distributor. A list of QSC International
distributors is available at www.qscaudio.com.
To register your QSC product online, go to www.qscaudio.com and select ”Product Registration”. Other questions regarding this warranty can be
answered by calling, e-mailing or contacting your authorized QSC distributor.
© 2009, QSC Audio Products, LLC.
Patents may apply or be pending.
QSC is a registered trademark of QSC Audio Products, LLC.
“QSC” and the QSC logo are registered with the U.S. Patent and Trademark Office.
All trademarks are the property of their respective owners.
2
Introduction
The Installation Line Array (ILA) is a high performance line array system designed for the needs of Houses of Worship, Performing Arts facilities and a
multitude of other venue types. The current ILA family is composed of the WL2082-i line array element, WL118-sw subwoofer, FB2082-i array frame,
PB2082-i pull-back bar, EB2082-i extension bar, and GS115-sw ground stack kit.
Installation Line Arrays may be used in outdoor applications where the system is somewhat protected from the elements. The enclosure material is
formulated with UV inhibitors, the grille is made of aluminum and the woofer cones are weather resistant.
WL2082-i
The WL2082-i line array element uses two high-power, neodymium magnet, 2 voice-coil, 8 low-frequency drivers in a two-and-a-half-way configura-""
tion. Both woofers produce low frequencies but only one covers the mid-range, resulting in far better horizontal directivity control in the crossover
region. Excellent high-frequency output and clarity are provided by a pair of 1.75 voice coil, neodymium magnet compression drivers with titanium "
diaphragms. These drivers are mounted to QSC’s patented* multiple-aperture diffraction waveguide that provides an extremely wide horizontal cover-
age of 140º. As a result, systems will rarely require side or center fill speakers and solid stereo imaging is preserved across the listening area.
The low-frequency capability of a WL2082-i array extends to 68 Hz (-10 dB); adequate for speech/vocal and acoustic music program material. For
reinforcement of program material with more demanding low-frequency content, the WL118-sw companion subwoofer is available.
WL2082-i Loudspeaker
Rigging plate attachment holes1.
Grille2.
Splay angle selection holes (rear of rigging plates)3.
Grille retaining screws (one on each end of enclosure)4.
Rigging plate retaining bolt5.
Rigging alignment notch6.
Rigging plates7.
Input plate8.
Rigging alignment pin9.
Horizontal Shading selector switch10.
BI AMP/TRI AMP Mode selector switch11.
Wiring table12.
NL8 Speakon™ connectors13.
12
3
4
5
7
6
89
10
11
12
13
*Patent number 7,177,437

Termékspecifikációk

Márka: QSC
Kategória: mélynyomó
Modell: WL118-sw

Szüksége van segítségre?

Ha segítségre van szüksége QSC WL118-sw, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók mélynyomó QSC

QSC

QSC KS112 Útmutató

4 Augusztus 2024
QSC

QSC LS118 Útmutató

2 Augusztus 2024
QSC

QSC SB-118F Útmutató

31 Július 2024
QSC

QSC KS118 Útmutató

29 Július 2024
QSC

QSC SB-2180 Útmutató

26 Július 2024
QSC

QSC SB-218F Útmutató

23 Július 2024
QSC

QSC WL118-sw Útmutató

23 Július 2024
QSC

QSC AcousticDesign AD-C81Tw Útmutató

22 Július 2024
QSC

QSC E218sw Útmutató

20 Július 2024
QSC

QSC SB-7218 Útmutató

16 Július 2024

Útmutatók mélynyomó

Legújabb útmutatók mélynyomó

Phase Technology

Phase Technology IW200-II Útmutató

4 Április 2025
Wet Sounds

Wet Sounds ZERO 10 S4 XZ-W Útmutató

2 Április 2025
SoundTube

SoundTube CM1001D Útmutató

2 Április 2025
JL Audio

JL Audio FS108-W5 Útmutató

31 Március 2025
Phase Technology

Phase Technology PL-12p Útmutató

30 Március 2025
ETON

ETON Graphit 8-2 Útmutató

19 Március 2025
ETON

ETON Graphit 8-4 Útmutató

19 Március 2025
ETON

ETON Graphit 10-4 Útmutató

19 Március 2025
ETON

ETON MW 10 FLAT Útmutató

19 Március 2025
ETON

ETON PW 8 Útmutató

19 Március 2025