Használati útmutató RetroSound HPA-1

Olvassa el alább 📖 a magyar nyelvű használati útmutatót RetroSound HPA-1 (2 oldal) a TV antenna kategóriában. Ezt az útmutatót 29 ember találta hasznosnak.

/ 2 PDF

Installation Guide

HPA1

Amplied AM/FM

Hide-away Antenna

HPA1 Antenna

Installation

The HPA1 antenna is designed to mount inside your vehicle when you are not using a

traditional fender-mounted antenna.

1. Place the main body of the HPA1 as high in the dash as possible. Avoid placing it

near any high-current wiring.

2. Ground the HPA1 to a clean metal point close to its body with the small braided

cable and eyelet.

3. Route the antenna cable with the thin black power wire to your radio location.

Connect the thin black wire to a 12-volt ignition source or the blue power antenna

output wire of your RetroSound® radio.

4. Connect the male antenna plug into the female antenna receptacle of your radio.

www.retromanufacturing.com

Termékspecifikációk