Használati útmutató RetroSound PA-01
RetroSound
TV antenna
PA-01
Olvassa el alább 📖 a magyar nyelvű használati útmutatót RetroSound PA-01 (3 oldal) a TV antenna kategóriában. Ezt az útmutatót 18 ember találta hasznosnak és 9.5 felhasználó értékelte átlagosan 4.0 csillagra
Oldal 1/3
Welcome
Thank you for purchasing a RetroAntenna
®
power antenna. This antenna features fully automatic operation. Please note that this antenna
does not work with antenna systems requiring a switch.
Our antenna uses a standard end designed to fit most applications. Some factory radios for 1995 and newer Fords, 1988 and newer GMs and
some imports use a unique connector at the the radio, and an adapter may be needed. Contact a local car audio shop for the correct
adapter part if one is needed.
1. Removing the Old Antenna
a) Disconnect the battery before you begin. Gain access to the underside of the fender area through the trunk, fender, splash panel, etc.
b) Remove and disassemble the old antenna and base. Retain the old base and mounting parts for your reference. In some cases you
can reuse them if you wish to keep the old look. Remove the mounting bracket, drain tube, electrical wires and antenna coaxial cable.
When removing electrical wires and the coaxial cable from the antenna, follow the wire’s path to the closest connector and
disconnect. DO NOT CUT THE COAXIAL CABLE
c) Remove the old antenna from below the fender.
Warranty
If your product does not work properly because of defects in materials or workmanship, Retro Manufacturing, LLC (collectively referred to as
the “warrantor”) will for the length of One Year, which starts with the date of original purchase (“warranty period”), at its option either (a)
repair your product with new or refurbished parts, or (b) replace it with a new or refurbished product. The decision to repair or replace will be
made by the warrantor.
To handle warranty issues, contact us at support@retrosound.com or call 702.483.2222. All returns and warranty issues must be
accompanied by a Return Authorization (RA) number along with a copy of your original purchase receipt. Any items sent to us without
a RA number and copy of the receipt will be refused. Once an RA number is issued, send the product along with the original sales
receipt to the address above.
www.retromanufacturing.com
7470 Commercial Way
Henderson, NV 89011
702.483.2222
INSTALLATION INSTRUCTIONS
PA-01 PA-03
Termékspecifikációk
| Márka: | RetroSound |
| Kategória: | TV antenna |
| Modell: | PA-01 |
Szüksége van segítségre?
Ha segítségre van szüksége RetroSound PA-01, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók TV antenna RetroSound
29 Augusztus 2024
19 Augusztus 2024
17 Augusztus 2024
17 Augusztus 2024
15 Augusztus 2024
15 Augusztus 2024
15 Augusztus 2024
15 Augusztus 2024
Útmutatók TV antenna
- TV antenna Kathrein
- TV antenna DeLock
- TV antenna Steren
- TV antenna Clarion
- TV antenna King
- TV antenna President
- TV antenna Icy Box
- TV antenna Magnavox
- TV antenna Mohu
- TV antenna August
- TV antenna Alpine
- TV antenna Evolveo
- TV antenna Strong
- TV antenna Meliconi
- TV antenna Garmin
Legújabb útmutatók TV antenna
30 Március 2025
28 Március 2025
28 Március 2025
27 Március 2025
27 Március 2025
27 Március 2025
26 Március 2025
8 Január 2025
8 Január 2025
8 Január 2025