Használati útmutató Sharp EL-501W
Sharp
számológép
EL-501W
Olvassa el alább 📖 a magyar nyelvű használati útmutatót Sharp EL-501W (8 oldal) a számológép kategóriában. Ezt az útmutatót 18 ember találta hasznosnak és 9.5 felhasználó értékelte átlagosan 4.7 csillagra
Oldal 1/8
EL-501W
SCIENTIFIC CALCULATOR
OPERATION MANUAL
MODEL
ENGLISH
INTRODUCTION
Thank you for purchasing the SHARP Scientific Calculator
Model EL-501W.
About the calculation examples (including some formulas
and tables), refer to the reverse side of this English manual.
Refer to the number on the right of each title on the
manual for use.
After reading this manual, store it in a convenient location for
future reference.
Operational Notes
• Do not carry the calculator around in your back pocket, as
it may break when you sit down. The display is made of
glass and is particularly fragile.
• Keep the calculator away from extreme heat such as on a
car dashboard or near a heater, and avoid exposing it to
excessively humid or dusty environments.
• Since this product is not waterproof, do not use it or store
it where fluids, for example water, can splash onto it.
Raindrops, water spray, juice, coffee, steam, perspiration,
etc. will also cause malfunction.
• Clean with a soft, dry cloth. Do not use solvents or wet
cloth.
• Do not drop it or apply excessive force.
• Never dispose of batteries in a fire.
• Keep batteries out of the reach of children.
• This product, including accessories, may change due to
upgrading without prior notice.
SHARP will not be liable nor responsible for any inciden-
tal or consequential economic or property damage caused
by misuse and/or malfunctions of this product and its
peripherals, unless such liability is acknowledged by law.
♦Press the RESET switch (on the back), with the tip of a
ball-point pen or similar object, only in the following cases.
Do not use an object with a breakable or sharp tip. Note
that pressing the RESET switch erases all data stored in
memory.
• When using for the first time
• After replacing the batteries
• To clear all memory contents
• When an abnormal condition occurs and all keys are
inoperative.
If service should be required on this calculator, use only a
SHARP servicing dealer, SHARP approved service facility,
or SHARP repair service where available.
Hard Case
(During actual use not all symbols are displayed at the same time.)
If the value of mantissa does not fit within the range
±0.000000001 – ±9999999999, the display changes to scien-
tific notation. The display mode can be changed according to
the purpose of the calculation.
2ndF : Appears when @ is pressed, indicating that the
functions shown in orange are enabled.
HYP : Indicates that h has been pressed and the hy-
perbolic functions are enabled. If are@ H
pressed, the symbols “ ” appear, indicat-2ndF HYP
ing that inverse hyperbolic functions are enabled.
DEG/RAD/GRAD: Indicates angular units and changes each
time is pressed. The default setting is DEG.G
( ) : Appears when a calculation with parentheses is per-
formed by pressing (.
BIN : Indicates that has been pressed.@ ê
Binary system mode is selected.
OCT : Indicates that has been pressed.@ î
Octal system mode is selected.
HEX : Indicates that has been pressed.@ ì
Hexadecimal system mode is selected.
CPLX : Indicates that has been pressed.@ π
Complex number mode is selected.
STAT : Indicates that @ Æ has been pressed.
Statistics mode is selected.
M : Indicates that a numerical value is stored in the
independent memory.
E : Appears when an error is detected.
PRINTED IN CHINA / IMPRIMÉ EN CHINE / IMPRESO EN CHINA
04AGK (TINSE0496THZZ)
BEFORE USING THE CALCULATOR
Key Notation Used in this Manual
In this manual, key operations are described as follows:
To specify A (HEX): A
To specify π: @ V
To specify Exp : E
Functions that are printed in orange above the key require
@ to be pressed first before the key. Numbers are not
shown as keys, but as ordinary numbers.
Power On and Off
Press ª to turn the calculator on, and F to turn it off.
Clearing Numbers
• Press ª to clear the entries except for a numerical
value in the independent memory and statistical data.
• Press æ to clear the number entered prior to use of
function key.
• In case of one digit correction of the entered number, press
ø (right shift key).
DISPLAY
←Symbol
Mantissa Exponent
• Floating point system
• Scientific notation system
Termékspecifikációk
| Márka: | Sharp |
| Kategória: | számológép |
| Modell: | EL-501W |
Szüksége van segítségre?
Ha segítségre van szüksége Sharp EL-501W, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók számológép Sharp
10 Október 2024
4 Október 2024
2 Október 2024
30 Szeptember 2024
24 Szeptember 2024
23 Szeptember 2024
22 Szeptember 2024
22 Szeptember 2024
20 Szeptember 2024
19 Szeptember 2024
Útmutatók számológép
- számológép Canon
- számológép Genie
- számológép Citizen
- számológép XD Enjoy
- számológép Global Tronics
- számológép Genius
- számológép Olympia
- számológép Aurora
- számológép Trevi
- számológép Victor
- számológép Rex
- számológép Milan
- számológép Sencor
- számológép Taurus
- számológép Olivetti
Legújabb útmutatók számológép
30 Március 2025
22 Március 2025
22 Március 2025
22 Március 2025
22 Március 2025
12 Január 2025
28 December 2024
22 December 2024
22 December 2024
16 December 2024