Használati útmutató StarTech.com 11050-PC-SERIAL-CARD
Oldalak 2 Engels nincs kategorizálva
Olvassa el ingyen online a(z) StarTech.com 11050-PC-SERIAL-CARD használati útmutatóját, vagy töltse le PDF-ben. Az útmutatót 25 ember találta hasznosnak. Kérdése van a modellről? Tegyen fel kérdést
Quick-Start Guide
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.
Manual Revision: March 24, 2022
Product Diagram (11050-PC-SERIAL-CARD)
Port/LED/
Connector
Function
1Bracket• Used to secure the card on the Host Computer
2Activity LEDs
• Receive and transmit LEDs illuminate green when
there’s activity
3Serial Port DB-9• Connect Serial Peripheral Devices
4J2 Jumpers
• Used to or power output. The EnableDisablePin 9
default position is . Disable
5
J5 Power
Connector
• Optional: connect the Host Computer Power Supply
(4 Pin SP4/Floppy power connector) to Provide Power
over PIN 9
6
J3 Jumper
• Optional: used to change the voltage output of Pin 9
• PCI12V12V draws power from the PCIe slot. Outputs
• AUX12V J5 Power Connector. draws power from the
Outputs 12V
• AUX5V J5 Power Connector. draws power from the
Outputs 5V
7
PCIe 2.0 p1-x1
Connector
• Insert into a on thePCI Express Slot Host Computer
1-Port PCI Express Serial Card with COM Port Activity LEDs - 16C1050 UART
Package Contents
• Serial Parallel PCI Express Card x1
• Low-Prole Bracket x1
• Quick-Star Guide x1
Requirements
For the latest requirements, please visit www.startech.com/11050-PC-SERIAL-CARD
• Computer with an available PCI Express Slot (x1, x4, x8, or x16)
Installation
Install the PCI Express Card
WARNING!
PCI Express Cards can be severely damaged by static electricity. Ensure that you
are properly grounded before you open your or touch the Computer CasePCI
Express CardAnti-Static Strap . You should wear an when you install any computer
component. If an isn’t available, discharge any built-up static Anti-Static Strap
electricity by touching a large for several seconds. Only Grounded Metal Surface
handle the by its edges and don’t touch the gold connectors.PCI Express Card
1. Turn o your and any that are connected to it (for Computer Peripheral Devices
example, , , .).PrintersExternal Hard Drivesetc
2. Unplug the from the back of your .Power Cable Computer
3. Disconnect any that are connected to your .Peripheral Devices Computer
4. Remove the from your . Consult the documentation that Cover Computer Case
came with your for details about how to do this safely.Computer
5. Locate an open and remove the corresponding PCI Express SlotSlot Cover Plate
from the back of your . Consult the documentation that came with Computer Case
your for details about doing this safely. This card works in PCI Express x1, Computer
x4, x8, or p1-x16 slots.
6. Gently insert the into the open and fasten the PCI Express CardPCI Express Slot
BracketComputer Case to the back of the .
Note: If you install the into a or a PCI Express Card Small Form Factor Low-Prole
Desktop SystemFull-, it may be necessary to replace the pre-installed standard
Height Bracket Low-Prole Bracketwith the included .
5
7
1
2
6
4
3
Termékspecifikációk
| Márka: | StarTech.com |
| Kategória: | nincs kategorizálva |
| Modell: | 11050-PC-SERIAL-CARD |
Szüksége van segítségre?
Ha segítségre van szüksége StarTech.com 11050-PC-SERIAL-CARD, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók nincs kategorizálva StarTech.com
StarTech.com EC13942A2 Útmutató StarTech.com EC13942 Útmutató StarTech.com 1P3FPC-USB-SERIAL Útmutató StarTech.com EC1S952 Útmutató StarTech.com EC1UP Útmutató StarTech.com PEX1S1P950 Útmutató StarTech.com PCI2S1P2 Útmutató StarTech.com PCI4S650DV Útmutató
Népszerű termékek – nincs kategorizálva
StarTech.com PEX1S953LP Útmutató StarTech.com DRW150SCSIBK Útmutató StarTech.com WALL-WORKSTATION-S Útmutató