Használati útmutató StarTech.com O1210I-NETWORK-CARD
Oldalak 2 Engels hálózati kártya/adapter
Olvassa el ingyen online a(z) StarTech.com O1210I-NETWORK-CARD használati útmutatóját, vagy töltse le PDF-ben. Az útmutatót 23 ember találta hasznosnak. Kérdése van a modellről? Tegyen fel kérdést
Quick-Start Guide
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support
Manual Revision: September 5, 2024
Product Diagram
O1210I-NETWORK-CARD
ComponentFunction
1Pull Tab
• Pull to remove the from the Network Card
OCP NIC 3.0 Slot
2SFP+ Slot x 2
• Connect a orSFP+ Module, Active Optical Cable,
Direct Attach Copper Cable Network Card to the
• Supports 1Gbps and 10Gbps
3Locking Screw• Secure the card to the Host Server Case
4
4C+ Connector
(OCP NIC 3.0)
• Insert into an on the OCP NIC 3.0 SlotHost Server
2-Port OCP 3.0 10G Open SFP+ Network Card - Intel
Package Contents
• Network Card x 1
• Quick-Start Guide x 1
Requirements
For the latest requirements, please visit: www.StarTech.com/O1210I-NETWORK-CARD
• Host server with an available OCP NIC 3.0 Slot
Installation
Install the Server Network Card
WARNING!
Static Electricity can severely damage. Ensure that you are adequately Network Cards
groundedHost Server CaseServer Network Card before you open your or touch the .
You should wear an oruseanwhen installing any Anti-Static Strap Anti-Static Mat
computer component. If an isn’t available, discharge any built-up Anti-Static Strap
static electricity by touching a large for several seconds. Only Grounded Metal Surface
handle the by its edges and do not touch the gold connectors.Server Network Card
1. Turn o the and any that are connected to it (e.g. Host Server Peripheral Devices
printers, external hard drives, etc.).
2. Unplug the from the back of the , and disconnect any Power Cable Host Server
Peripheral Devices that are connected.
3. Remove the from the . Consult the documentation that came with Cover Server Case
the for details about doing this safely.Host Server
4. Locate an open and remove the corresponding OCP NIC 3.0 Slot Slot Cover Plate
from the back of the .Host Server
5. Gently insert the into the. Turn the Server Network Card OCP NIC 3.0 SlotLocking
Screw Server Network CardServer Case/Chassisto attach the to the back of the .
6. Return the onto the .CoverHost Server
7. Install one or more , , or SFP/SFP+ ModulesActive Optical CablesDirect Attach
Copper CablesSFP+ Slots into the available .
8. Reconnect all of the disconnected in .Peripheral DevicesStep 2
9. Reconnect the to the back of the .Power CableHost Server
10. Turn on the and .Host ServerPeripheral Devices
*Product may vary from image
1
3
2
2
4
Termékspecifikációk
| Márka: | StarTech.com |
| Kategória: | hálózati kártya/adapter |
| Modell: | O1210I-NETWORK-CARD |
Szüksége van segítségre?
Ha segítségre van szüksége StarTech.com O1210I-NETWORK-CARD, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók hálózati kártya/adapter StarTech.com
StarTech.com ST1000SPEX2T Útmutató StarTech.com OR41GI-NETWORK-CARD Útmutató StarTech.com ST1000SPEXD2 Útmutató StarTech.com CDP2DVI Útmutató StarTech.com AX54005A-USB-WIFI-6E Útmutató StarTech.com U1-USB-ISOLATOR Útmutató StarTech.com ST1000SPEXD4T Útmutató StarTech.com USB32HDVGA Útmutató
Összes StarTech.com hálózati kártya/adapter használati útmutató
Népszerű termékek – hálózati kártya/adapter
StarTech.com P011GI-NETWORK-CARD Útmutató StarTech.com PEX1000MMSC2 Útmutató StarTech.com NIC PCI Express Gigabit Card Útmutató