Használati útmutató TOA D-911
Oldalak 2 Engels nincs kategorizálva
Olvassa el ingyen online a(z) TOA D-911 használati útmutatóját, vagy töltse le PDF-ben. Az útmutatót 18 ember találta hasznosnak. Kérdése van a modellről? Tegyen fel kérdést
Thank you for purchasing TOA's D-911 VCA Fader unit.
Please carefully follow the instructions in this manual to ensure long, trouble-free use of your equipment.
D-911D-911 VCA FADER UNIT
INSTRUCTION MANUAL
1. GENERAL DESCRIPTION
The D-911 VCA Fader Unit is designed to be used in
conjunction with the D-901 Digital Mixer. Connecting to the
D-984VC VCA Control Module permits volume adjustment
of all the channels and contact controls of the D-901 Mixer.
2. HANDLING PRECAUTIONS
•The D-911 Fader Unit is connected to the VCA control
modules mounted in the D-901 Digital Mixer. Connect
each of eight terminals to
the D-984VC's terminal of
the same name by way of
the fully-connected straight
cable as shown on the
right.
•Use the D-901 firmware of version 3.0 or later. Firmware
versions earlier than it cannot be used in conjunction with
the fader unit.
The firmware version number can be confirmed on the D-
901's front panel-mounted display.
3. BLOCK DIAGRAM
[Connection]
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
1 81 8––
TOAD-901Series
Softw areVer3.00
[Display example]
VCA
IN CH 1-6
VCA
IN CH 7-12
VCA
OUT CH 1-4
VCA
OUT CH 5-8
CTRL
IN 1-4
CTRL
OUT 1-4
CTRL
IN 5-8
CTRL
OUT 5-8
16
DC
712
DC
14
DC
58
DC
DC
14
1 4
Make contact
5 8–
Same as above
4. SPECIFICATIONS
• Accessories
Fader knob (Red, Yellow)*............................ 3 each
Volume knob (Red)*.............................................. 2
Rack mounting screw ............................................. 4
Rack mounting fiber washer .................................. 4
Rack mounting bracket (preinstalled on the unit) ... 2
*Convenient for color coding to distinguish
channels to which stereo link or group
settings are assigned.
Note
The design and specifications are subject to
change without notice for improvement.
Power Supply 5 V DC (supplied from the optional D-984VC)
Connector RJ45 connector x 8
Input Fader ControlInput fader (100 mm) x 12
Output Volume ControlOutput volume control x 8
Contact ControlIlluminated switch x 8
Remote OutputNo-voltage make contact output
(contact capacity: 30 V DC, 4 A)
Remote SwitchSeesaw switch for activating the remote function of the
power distributor
FinishPanel: Pre-coated steel plate, black(30% glossy)
Dimensions 482.6 (w) x 177 (h) x 61.3 (d) mm
(excluding projection)
Weight 2.7 kg
If your firmware version is old, download the latest
software program and the "D901 PC software instruction
manual" from the TOA Internet product data site
[http://www.toa-products.com/]. For the update
procedure, refer to the instruction manual.
•For channels with stereo link or group settings
established at the D-901, the lowest numbered channels
in the stereo linked or grouped channels are enabled.
•Control's knob position 10 of the D-911 provides the
channel gain set by the D-901. As a guide, knob position
8 provides about 10 dB below the gain set by the D-901.
Termékspecifikációk
| Márka: | TOA |
| Kategória: | nincs kategorizálva |
| Modell: | D-911 |
Szüksége van segítségre?
Ha segítségre van szüksége TOA D-911, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók nincs kategorizálva TOA
TOA HY-CN1W Útmutató TOA N-8052DS Útmutató TOA BC-920 Útmutató TOA T-02S Útmutató TOA TU-651M Útmutató TOA U-43R Útmutató TOA BP-900A Útmutató TOA S-01S Útmutató