Használati útmutató TOA N-8052DS

Olvassa el alább 📖 a magyar nyelvű használati útmutatót TOA N-8052DS (2 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 16 ember találta hasznosnak és 4 felhasználó értékelte átlagosan 4.6 csillagra

INSTALLATION

MANUAL

DOOR STATIONN-8052DS

Designed toconnectto theIPIntercomExchange,theN-

8052DSis adoorstation featuringhigh qualityhands-free

conversation and hasa contact output (momentarilyclosed)

to remotely control an electronic door lock.

Usingwithanelectrical box , the station can be mounted to

TheN-8052DSfeatures robust indoor design, Theoperating

temperature rangeis –10 to +50°C.

Asprov ided w ithguar d netsinsi detocove r ove rthe

openings of microphone and speaker, the N-8052DScan be

installed free from care in public space.

2. WALL MOUNTING

1. GENERAL DESCRIPTION

Mounting to a 2-gang Switch Box (with cover)

Mount theN-8052DS toelectrical

boxes mounted in the wall.

Notes

The wallshouldbeover 12 mm thick,and theopening in

thewallfora n electricalboxshouldbeunder115mm

(wide) by 116 mm (high).

Whenusingforelectronicdoorlockcontrol,fixtheN-

8052DSwith tamper-proofscrewssuch as"Torx"screws

to prevent it from being easily removed.

Be sure to ground the electrical box.

4. WIRING

4.1. Connection to the Exchange

4.2. Connection to an External Relay

ConnecttheExchange tothestation'sLINEterminalsvia

the E-7000TB Terminal Board as illustrated.

E-7000TB

Terminal board

Mini-clamp connector

(Supplied with the

N-8000EX/8010EX)

Twisted pair cable

N-8000EX/8010EX Exchange

16 lines

Bothupperandlower

terminals(clip terminals)

are internally connected.

TheN-8052DScomeswith2typesofscrews:ovalhead

combinationscrewM4x25and o val headcombination

screw UNCNo.6x 18.Forthe electricalboxprovided with

unified threads, use theoval headcombination screws UNC

No.6 x 18.

Accessory screws

External

power supply

Relay

Diode

N-8000EX/8010EX Exchange

+24 V DC

GND

+

-

3. INSTALLATION PRECAUTIONS

Wh enins tallingtheN-80 52DS

outdoors or at locationswhere it gets

wet withwater, tightlyseal thepanel

edges. Besides, provideaweep hole

at theundersideof themountingbox

to permit water to drain off.

When installingthe N-8052DSunder

difficul t environm ent alconditio ns

such asin coastalareas or athumid

locations,coverthe insideof theN-

8052DS with coating. For thecoating

method, consult TOA sales office.

Seal the panel edges.

N-8052DS's

front panel

YC-302

2-gang electrical box

(option)

Wall surface

N-8052DS

N-8052DS (rear panel)

LINE

H

C

Open collector output:

30 V DC, 50 mA

N-8052DS (rear panel)

LINE

H

C

a wall.

Oval head combination screw

M4 x 25 (accessory)

Termékspecifikációk