Használati útmutató Topeak Ninja C

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Topeak Ninja C (2 oldal) a Afzuigkap kategóriában. Ezt az útmutatót 20 ember találta hasznosnak és 7 felhasználó értékelte átlagosan 4.9 csillagra

HOW TO REMOVE NINJA C FROM HANDLEBAR

Periodically check that NINJA C is seated in

handlebar properly.

WARNING

PULL OUT

User's Guide

NINJA CGB

HOW TO STORE NINJA C IN HANDLEBAR

LIMITATIONS

Handlebar with minimum 70 mm straight

section end

Fits inner ø 16.5-20 mm tubeFits grips with

end caps

MAINTENANCE

Loosen bolt and remove end cap of grip on both

sides. (Depends on the type of handlebar)

(Example for grips with end caps)

Turn the cap to expand the

rubber ring as little as necessary.

Press to adjust

the shape of

rubber ring as

shown.

Push NINJA C into the end

of handlebar on both sides.

If NINJA C does not fit properly into handlebar, adjust

tension of rubber ring as necessary and reinstall.

PUSH

Rubber RingChain Pin x 2

Compartment

• Fits Road handlebar with

minimum mm straight 70

section end.

• Fits inner ø 16.5-20 mm tube.

• Fits multi-speed chains up to

Campagnolo® 11 speed hollow

pin chain.

• Please read these instructions

before first use.

Chain Hook

4 mm Allen Key

(Chain

Pin is not

included)

Adjusting Knob and

Chain Pin Breaker

• Lubricate and maintain tool with Teflon®

based lubricant as needed.

• To prevent rusting, keep tool dry.

1STEP 2STEP3STEP

Cap

Rivet Anvil

of hollow pin

12 3

ø 16.5 mm

ø 20mm

ROAD HANDLEBARSFLAT BARS

70mm

70mm

Termékspecifikációk