Használati útmutató V-TAC VT-6042-4

Olvassa el alább 📖 a magyar nyelvű használati útmutatót V-TAC VT-6042-4 (10 oldal) a Ventilator kategóriában. Ezt az útmutatót 22 ember találta hasznosnak.

/ 10 PDF

CAUTION

• The product must only be installed by an authorized electrician and in compliance with local,

regional and state electricity regulations.

• Check if the electricity specification of this device are compatible with your installation.

• Turn off the power before installing or repairing the fan.

• The fan must be properly grounded to avoid the risk of electric shock.

• Use and unauthorized technical modifications could suppose a risk of injury.

• Should be 220V as per the specifications.

• Do not connect the fan motor to a current dimmer. It could give unsatisfactory performance

(engine humming) and cause engine damage.

• Be careful while working near the spinning blades.

• The fan must be installed so that the blades are at least 2, 3 meters above the ground.

• The fan must be hung from a structure capable of supporting a weight of at least 50 kg. The

fixture must be able to support the weight of the fan in motion and should not wobble or

loosen.

• Make sure that the blades do not come in contact with any object at the installation site.

Always leave a minimum clearance of 50cm from the tip of the blades to the wall or ceiling.

• Keep in mind that the larger the space, the better the fan’s air flow will be.

• This device is designed for indoor use only. Do not use in an open space or where it may be

exposed to water or moisture.

• Never install the appliance in a room with a high degree of humidity.

• The fan must not be started in a room with a gas appliance running at the same time.

Termékspecifikációk