Használati útmutató Victron BlueSolar PWM DUO LCD SB 12 24V 20A

Victron Akkumulátor töltő BlueSolar PWM DUO LCD SB 12 24V 20A

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Victron BlueSolar PWM DUO LCD SB 12 24V 20A (75 oldal) a Akkumulátor töltő kategóriában. Ezt az útmutatót 7 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/75
Manual
EN
Handleiding
NL
Manuel
FR
Handbuch
DE
Manual
ES
Manual
SV
Manuale
IT
Manuál
CZ
Руководство по
эксплуатации
RU
BlueSolar PWM DUO-LCD-USB
1
EN NL FR DE ES SE IT CZ RU
1. General Information
The BlueSolar PWM DUO 12V|24V|20A LCD-USB series uses Pulse Width Modulation
(PWM) charge voltage control combined with a multistage charge control algorithm. This
leads to superior charging and enhanced battery performance. The filtered PWM power
control system uses highly efficient and reliable power MOSFET transistors.
2. Features
Three stage battery charging [bulk absorption float]
External Temperature sensor included
2 Battery outputs for 2 separate batteries.
Battery type: Lead-Acid and LiFePO4
Protected against reverse polarity connection of the solar panels and/or battery.
USB output for charging telephones and tablets.
Temperature protection.
3. Installation
IMPORTANT
Always connect battery 1 first, in order to allow the Controller to
recognize system voltage.
Use a 12V (36 cells) solar array for a 12V system.
Use a 24V (72 cells) solar array for a 24V system.
Important note: always connect the battery 1 first.

Termékspecifikációk

Márka: Victron
Kategória: Akkumulátor töltő
Modell: BlueSolar PWM DUO LCD SB 12 24V 20A

Szüksége van segítségre?

Ha segítségre van szüksége Victron BlueSolar PWM DUO LCD SB 12 24V 20A, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók Akkumulátor töltő Victron

Útmutatók Akkumulátor töltő

Legújabb útmutatók Akkumulátor töltő