Használati útmutató Audio-Technica ES925C/XLR
Oldalak 3 Engels mikrofon
Olvassa el ingyen online a(z) Audio-Technica ES925C/XLR használati útmutatóját, vagy töltse le PDF-ben. Az útmutatót 23 ember találta hasznosnak. Kérdése van a modellről? Tegyen fel kérdést
1
ES925C6/XLR
ES925C12/XLR
ES925C15/XLR
ES925C18/XLR
ES925C21/XLR
ES925C24/XLR
User Manual
CARDIOID CONDENSER
MODULAR GOOSENECK MICROPHONE
WITH XLR POWER MODULE
■Introduction
Thank you for purchasing this product. Before using the product, read through
the user manual to ensure that you will use the product correctly. Please keep
this manual for future reference.
■Features
• Modular microphone system comprised of an ES Series capsule, gooseneck
assembly, and power module.
• RGB LED built into the gooseneck assembly can be linked seamlessly with
ATUC Series products and the desk stand (AT8699R).
• Insert the power module into a standard XLRF-type connector, or use the
included quick mount stand adapter (AT8473) to attach it to a microphone
stand.
• Cover a wide sound acquisition range from 90° to 360° by replacing the
capsule.
■Safety precautions
Although this product was designed to be used safely, failing to use it correctly
may result in an accident. To ensure safety, observe all warnings and cautions
while using the product.
■Cautions for the product
• Do not subject the product to strong impact to avoid malfunction.
• Do not disassemble, modify or attempt to repair the product.
• Do not handle the product with wet hands to avoid electric shock or injury.
• Do not store the product under direct sunlight, near heating devices or in a
hot, humid or dusty place.
■Notes on use
• Do not swing or pull the product. Doing so may cause disconnection or
damage.
• The circuitry in the microphone takes about 30 seconds to stabilize after power
is supplied. You may hear some audio disturbance during startup.
• Check that the carry case ground is grounded with the mic cable latch firmly
engaged before use.
• Do not excessively bend the gooseneck assembly, rotate the ends of the
capsule, or pull on them. Doing so may cause disconnection or malfunction.
• The product is a modular system comprised of a microphone element,
gooseneck assembly and power module. Make sure the parts are firmly
attached before use.
• Do not remove the rubber O-ring on the power module connecting part at the
lower section of the gooseneck assembly and the lower part of the XLR power
module.
• When attaching parts, remove the black cap on the capsule connecting part
of the gooseneck assembly. Do not remove the silicone part at the end of
the capsule connecting part.
Silicone part
Do not remove
Termékspecifikációk
| Márka: | Audio-Technica |
| Kategória: | mikrofon |
| Modell: | ES925C/XLR |
Szüksége van segítségre?
Ha segítségre van szüksége Audio-Technica ES925C/XLR, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók mikrofon Audio-Technica
Audio-Technica AT4080 Útmutató Audio-Technica XM5S-SV Útmutató Audio-Technica AT8033 Útmutató Audio-Technica ATW-CHG3N Útmutató Audio-Technica BP4071L Útmutató Audio-Technica BP4071 Útmutató Audio-Technica MTB40S Útmutató Audio-Technica ATM710 Útmutató
Összes Audio-Technica mikrofon használati útmutató
Népszerű termékek – mikrofon
Audio-Technica AT882TH/DS3RC5 Útmutató Audio-Technica ATM-650 Útmutató Audio-Technica ATM610a Útmutató