Használati útmutató AXESS 99-5846B

Olvassa el alább 📖 a magyar nyelvű használati útmutatót AXESS 99-5846B (22 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 9 ember találta hasznosnak és 5 felhasználó értékelte átlagosan 4.9 csillagra

Oldal 1/22
Metra. The World’s Best Kits.
®
MetraOnline.com © COPYRIGHT 2022 METRA ELECTRONICS CORPORATION REV. 12/9/22 INST99-5846B
INSTALLATION INSTRUCTIONS
99-5846B
Attention! With the key out of the ignition,
disconnect the negative battery terminal
before installing this product. Ensure that all
installation connections are secure before
cycling the ignition to test this product.
Patent # 10,579,232
KIT FEATURES
ISO DIN radio provision with pocket
ISO DDIN radio provision
Touchscreen display for climate and personalization features
Integrated hazard button and passenger airbag light
Radio can be mounted up top or at bottom
Painted Matte Black
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
• 8mm & 9/32” Socket wrench
TABLE OF CONTENTS
Dash Disassembly ..................................................2
Kit Preparation .......................................................3
Kit Assembly
–ISO DIN radio provision with pocket ..................4
–ISO DDIN radio provision .....................................4
Axxess Interface Installation ............................5-14
WIRING & ANTENNA CONNECTIONS
Wiring Harness: Axxess interface built into touchscreen
Antenna Adapter: Included
Ford F-150 (with 4.2” screen) 2013-2014
KIT COMPONENTS
• A) Radio/Display trim panel with touchscreen display • B) Radio/Display sub-trim panel upper (a) • C) Radio/Display sub-trim panel lower (b)
• D) Radio brackets upper (a)
• E) Radio brackets lower (b) • F) Pocket • G) (4) Panel clips • H) (11) #6 x 3/8” Phillips pan-head screws
• I) (4) #8 x 3/8” Phillips truss-head screws • J) Touchscreen display assembly and wiring harness
• K) Antenna adapter (not shown)
A B C D
H I J
E F G
Visit MetraOnline.com for more detailed information about the product and up-to-date vehicle
specific applications
2
386.257.1187
|
MetraOnline.com
DASH DISASSEMBLY
1. Open and lower the glove box, then
remove (3) 8mm bolts from inside the
glove box facing up. (Figure A)
2. Remove (1) 7mm screw securing the
trim panel to the right of the radio, then
unclip and set to the side. (Figure B)
3. Remove (4) 9/32” screws securing
the radio/climate control panel to the
dash, then unclip, unplug, and remove.
(Figure C)
(Figure C)(Figure A)
(Figure B) (Figure D)
4. Remove (4) 9/32” screws securing the
radio chassis, then unplug and remove.
(Figure D)
5. Remove (4) 9/32” screws securing
the factory display, then unplug and
remove. (Figure D)
6. Unsnap, unplug, and remove the
traction control button and save for kit
assembly.
Continue to Kit Preparation
REV. 12/9/2022 INST99-5846B
3
KIT PREPARATION
1. There are two different radio/display
sub-trim panels to choose from. One for
mounting the radio in the upper portion
of the kit, and another one for mounting
it in the lower portion. (Figure A)
If mounting the radio in the upper
portion, a factory module will need to
be re-located:
a. Remove the module from the sub-
dash and relocate it to the bottom
of the dash opening. The mounting
brackets attached to the module will
need to be bent outward to make
room for the radio.
(Figure B) (Figure D)
(Figure A) (Figure C)
2. Attach the desired radio/display
sub-trim pane
l
to the radio/display
panel using the (12) #6 x 3/8” pan-head
screws provided. (Figure B)
3. Attach the touchscreen display
assembly to the radio/display sub-
panel using the (4) #8 x 3/8” truss-head
screws provided. (Figure C)
4. Snap the factory traction control button
into the panel.
5. Attach the (4) panel clips provided to
the radio/display panel. (Figure D)
Continue to Kit Assembly

Termékspecifikációk

Márka: AXESS
Kategória: nincs kategorizálva
Modell: 99-5846B

Szüksége van segítségre?

Ha segítségre van szüksége AXESS 99-5846B, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek