Használati útmutató AXESS AX-FT901

Olvassa el alább 📖 a magyar nyelvű használati útmutatót AXESS AX-FT901 (8 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 18 ember találta hasznosnak.

CAUTION!

All accessories, switches, climate

controls panels, and especially air bag indicator

lights must be connected before cycling the

ignition. Also, do not remove the factory radio

with the key in the on position, or while the

vehicle is running.

AX-FT901

INSTALLATION INSTRUCTIONS

AxxessInterfaces.com © COPYRIGHT 2018 METRA ELECTRONICS CORPORATION REV. 5/10/18 INSTAX-FT901

INTERFACE FEATURES

INTERFACE COMPONENTS

TOOLS REQUIRED

• Wire cutter • Crimp tool • Solder gun • Tape

• Connectors (example: butt-connectors, bell

caps, etc.)

TABLE OF CONTENTS

Connections to be made ....................................2-3

Installing the AX-FT901 interface ..........................3

Programming the ASWC-1 interface .................3-4

Screen operation ................................................4-6

Fiat 500 500L 2015 / 2014 (with U-Connect) Data Interface with SWC & Factory Display Retention †

• Provides accessory power

• Designed for non-amplified models

• Provides NAV outputs (parking brake, reverse, speed sense)

• Retains audio controls on the steering wheel

• Retains balance and fade

• Retains most of the vehicle settings that was displayed on the

factory radio *

• Micro “B” USB updatable

† For Continental Mopar head unit

* Attention!

The aftermarket radios backup camera input will be used to display the vehicle settings. If the radio doesn’t have a backup camera

Input, then there will be no visualization of the vehicle settings. An externally mounted screen could be substituted in this situation.

• AX-FT901 interface

• ASWC-1 interface

• AX-FT901 harness

• ASWC-1 harness

Termékspecifikációk