Használati útmutató Chief MSR6000
Chief
Lapos panel támogatás
MSR6000
Olvassa el alább 📖 a magyar nyelvű használati útmutatót Chief MSR6000 (7 oldal) a Lapos panel támogatás kategóriában. Ezt az útmutatót 10 ember találta hasznosnak és 5.5 felhasználó értékelte átlagosan 4.9 csillagra
Oldal 1/7
CHIEF MANUFACTURING INC. 8840-000079 RevF
1-800-582-6480 952-894-6280 FAX 952-894-6918 ©2007 Chief Manufacturing
8401 EAGLE CREEK PARKWAY, STE. 700 www.chiefmfg.com
SAVAGE, MINNESOTA 55378 USA 10/07
I N S T A LL A T IO N IN S T R U C T IO N S
MEDIUM FLAT PANEL DISPLAY STATIC MOUNT
MSR Series
The MSR Series static mount accommodates medium
flat panel displays weighing up to 1 lbs ( kgs).25 57
The teardrop holes in the mount allow for quick
connect/disconnect of the display, thus simplifying
installation and maintenance processes.
The top and bottom mounting brackets are adaptable to
single wood stud mounting or dual wood studs that are
16” on center.
After installing the display on the mount, the screen can
be locked in place using the convenient locking flag.
A padlock can be used on the latching flag for added
security.
The mount is concealed behind the display, making it a
low profile wall mount.
MSR Series
! IMPORTANT: If the installation of this product requires OSHPD seismic approval, refer to OSHPD pre-approval
documents and drawings before beginning installation. OSHPD documents and drawings are available at
www.chiefmfg.com, and located on the product information page for the mount.
BEFORE YOU BEGIN
CAUTION: To prevent damage to your monitor and MSR, which could affect or void the Factory
warranty, thoroughly study all instructions and illustrations before you begin to install the mount. Pay
particular attention to the Warnings and Cautions in this document.
The mount is designed to be installed using wall studs or supporting framework. The fasteners used to anchor the
mount must be capable of supporting five times the total weight of the equipment.
The maximum weight to be installed on the MSR Series static wall mount is 125 lbs (57 kg).
If you have any questions about this installation, contact Chief Manufacturing at 1-800-582-6480 or 952-582-6480.
Installation Instructions MSR Series
2
IMPORTANT WARNINGS and CAUTIONS!
WARNING A WARNING alerts you to the possibility of serious injury or death if you do not
follow the instructions.
CAUTION A CAUTION alerts you to the possibility of damage or destruction of equipment if you do
not follow the corresponding instructions.
WARNING Improper installation can result in serious personal injury! Make sure that the
structural members can support a redundant weight factor five times the total weight
of the equipment. If not, reinforce the structure before installing the mount.
WARNING Be aware of the potential for personal injury or damage to the equipment if it is not
installed correctly. Consider the weight of the mount without the display.
WARNING The installer is responsible for verifying that the display to which the wall mount is
fastened will safely support the combined load of all attached components or other
equipment.
WARNING The combined weight of the display placed on the wall mount must not exceed 125 lbs
(57 kg), the maximum support weight of the mount.
WARNING Watch for pinch points. Do not put your fingers between movable parts.
WARNING Make sure the flag securing the display is completely lowered at all times except when
removing or installing the display. The flag must be all the way down when
installing/removing cables.
CAUTION Check the unit for shipping damage before you begin the installation.
DIMENSIONAL DRAWING
Installation Instructions MSR Series
3
CONTENTS
DIMENSIONAL DRAWING ..................................... 2
TOOLS REQUIRED FOR INSTALLATION.............. 3
PARTS LIST .............................................................. 3
MSR INSTALLATION .............................................. 4
Select And Prepare Mounting Location.................... 4
Mount the MSR....................................................... 5
ATTACH MSB TO THE DISPLAY ........................... 6
INSTALL THE DISPLAY.......................................... 6
REMOVE THE DISPLAY.......................................... 6
TOOLS REQUIRED FOR
INSTALLATION
Drill and drill bit set
Wrench set
NOTE: Other tools may be required depending on your
method of installation.
Figure 1. Parts
PARTS LIST
Prior to assembly, unpack the carton completely. Verify
contents listed in Table 1 and Figure 1.
Read installation instructions completely. If you are
missing any of the listed parts, contact Customer Service
at: 1-800/582-6480.
Table 1. Parts List
REF DESCRIPTION QTY
10 MSR-Series Static Mount 1
20 *BOLT, Lag, 5/16” x 2 1/2” 2 or 4
30 *WASHER, 5/16” 2 or 4
**Extender, Latching Flag (not shown) 1
**Screw, Phillips Machine, 10-24 x 1/2”
(not shown)
1
**Nut, Lock, 10-24 (not shown) 1
** Included in Latching Flag Extension Kit
* Quantity required is dependent upon mounting
configuration chosen during installation. See “MSR
Installation” section of this document to determine
appropriate quantities.
10
Lag Bolts
20
Washers
30
Termékspecifikációk
| Márka: | Chief |
| Kategória: | Lapos panel támogatás |
| Modell: | MSR6000 |
Szüksége van segítségre?
Ha segítségre van szüksége Chief MSR6000, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók Lapos panel támogatás Chief
3 Április 2025
3 Április 2025
3 Április 2025
16 Január 2025
16 Január 2025
16 Január 2025
16 Január 2025
16 Január 2025
29 December 2024
29 December 2024
Útmutatók Lapos panel támogatás
- Lapos panel támogatás Nabo
- Lapos panel támogatás GPX
- Lapos panel támogatás Gabor
- Lapos panel támogatás Proaim
- Lapos panel támogatás Premier
- Lapos panel támogatás Newstar
- Lapos panel támogatás Digitus
- Lapos panel támogatás Speaka
- Lapos panel támogatás Hitachi
- Lapos panel támogatás Atdec
- Lapos panel támogatás Peerless
- Lapos panel támogatás SilverStone
- Lapos panel támogatás Metronic
- Lapos panel támogatás Vision
- Lapos panel támogatás Samsung
Legújabb útmutatók Lapos panel támogatás
8 Április 2025
3 Április 2025
3 Április 2025
3 Április 2025
3 Április 2025
3 Április 2025
3 Április 2025
3 Április 2025
3 Április 2025