Használati útmutató CRUX CS-CR41

Olvassa el alább 📖 a magyar nyelvű használati útmutatót CRUX CS-CR41 (3 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 14 ember találta hasznosnak és 4 felhasználó értékelte átlagosan 4.4 csillagra

BLACK / YELLOW FOR PARKING BRAKE OUTPUT

BLACK / YELLOW FOR PARKING BRAKE OUTPUT

RADIO REPLANT CEME

R

INTERFACING SOLUTIONS

Crux Interfacing Solutions • Chatsworth, CA 91311

phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com

rev.072925

1 of 4

PRODUCT FEATURES:

NOTES:

PARTS INCLUDED:

-Retains Steering Wheel Controls via built-in, pre-programmed interface.

-Navigaonal Outputs: Amp Turn On, Illuminaon, Parking Brake output & Reverse.

2. radio replacement in vehicles with 4.3” and 8.4” color screens. Also supports

3. Does not retaind Uconnect.

CSCR-41 MODULEAudio Filter

INSTALLATION DIAGRAM:

for each harness.

12-Pin Black

Connector

First Generation Harness

*Does not supply Reverse Trigger on Manual Transmissions. Reverse trigger wire from the

aftermarket radio and/or camera power must be connected to factory reverse light wire instead.

1 2 3

ON

4-Pin

Connector

Cap or insulate if

not being used

3.5MM SWC CABLES (Option A or B)

Use the proper 3.5MM to 4-Pin cable for your radio.

Plug in the selected 3.5MM SWC cable to the 4-pin port

on the module. See “DIP SWITCH SETTINGS” section.

AFTERMARKET

RADIO

VSS (Vehicle Speed Sense) Pink

Illuminaon (+) range O

Per Aowntenna/Amp Turn on Blue/ White

Reverse Triggte er* Purple/Whi

+12V Constant Yellow

+12V CC Red A

Ground Black

AMPLIFIED

NON AMPLIFIED

See page 2 for

speaker wire

connections

Audio

Filter

TO FACTORY

HARNESS

4. If vehicle is not equipped with Steering Wheel Controls use part# SOOCR-26

5. If you require a dash kit with SWC interface use part# DKCR-59K

CS-CR41

Radio Replacement with SWC Retention for

CHRYSLER, DODGE and JEEP Vehicles

CSCR-41

TO

AFTERMARKET

RADIO

Option A:

BLUE / YELLOW

Option B:

To aftermarket

radio SWC wire

or 3.5mm port

Insulate with tape

if not being used

SWC Cables

TROUBLESHOOTING

LED

LIGHT

LED MODULE FEEDBACK

Solid blue

Flashing blue

Solid red

Red off

CAN recognized

CAN not recognized

Module providing 12V ACC

12V ACC OFF

Termékspecifikációk